Filters
Go back
CIFA K40H Go to photo
CIFA K40H

CIFA Carbotech: two new arrivals

CIFA goes on in widening the CARBOTECH range, truck mounted pumps that thanks to new and performing materials reach longer booms respecting weight limits. Two more models will be introduced to the public at Intermat Paris 2015: K53H and K60H.

The CARBOTECH family thus grows from four to six models.

K53H and K60H can be mounted on 4 and 5 axles trucks.

If mounted on 4 axles, the limit is 42 and 44 ton respectively.

For both models the weight limit is widely respected so to allow users to load accessories, water, diesel and so on without breaching circulation rules and/or special permits and/or technical limits of vehicles. Truck mounted pump

Advertisement

Assembly on 5 axles allows an optimal load distribution on single axles so to allow circulation also in Countries where regulations are stricter.

K53H has a 53 m boom made of 5 sections (the final two in carbon fiber) with RZ folding system.

K60H has a 60 m boom made of 6 sections (the final three in carbon fiber) with RRZ folding system.

Both of them mount the new and performing HP1808ECX closed circuit pumping unit with maximum capacity of 180m3/h, 83 bar max pressure, 260 mm concrete cylinders that allow to reduce to 27 the number of maximum cycles per minute. A low number of cycles allows to reduce wear and therefore costs related to machine functioning.

The standard set up for these models, as well as for the entire CARBOTECH range, is particularly rich in accessories: beside the advanced management system via SMARTRONIC display, with stability and diagnostic control, it stands out for double thickness pipes CIFA Long Life Pipes, stabilization studied and designed according to the boom length.

Come to visit us at our booth 7H001!

Source: CIFA SpA

Sponsors