7 February 2013, 00:00
Also this year CTE renews its presence at the Munich Exhibition bringing important innovation in a space of 300 m2 in outdoor area F11, 1102/4: news for TRACCESS spiderlifts range and for ZED truck-mounted range with variable jacking stabilisation system.
Products on display:
- ZED 20.2 HV: truck-mounted articulated platform with variable jacking system – NEWS 2012
- ZED 23 JH: truck-mounted articulated platform with 23 m of working height on 3,5 ton – NEWS 2012
- B-Lift 230 Pro H: truck-mounted high range telescopic platform with 23 m of working height
- B-Lift 390 High Range: truck-mounted high range telescopic platform with 39 m of working height
- TRACCESS 230: track monted self-propelled platform with 23 m of working height
CTE will unveil in world premiere some product novelties about Traccess spiderlifts range in the segment of 13 to 15 m of working height, but at the moment we prefer not to reveal any details.
FOCUS ON PRODUCTS:
Truck-mounted articulated platform ZED 20.2 HV:
The main characteristic is the loading capacity of 300 kg at 20mt of working height, thanks to the optional loading cell. In this sense, CTE meets the increasing demands of European market to provide machines of B license with increased capacity for more versatility of use. The platform is very compact, in stowed position is only 2,5 mt height. Very important novelty is the unique working area (as ZED philosophy), with maximum performance throughout the whole working area. Turret rotation has been increased from 320°+320° to 340°+340°. This model was born with patented H stabilisation system with connecting rods: a CTE patent which guarantees the release of the beam, and consequently of the stabilizer, in one movement, without the aid of screw jacks and of cylinders. The H stabilization serves to move closer to the sidewalks and avoid sliding of the stabilizers. It reveals so perfect for all occasions in which we must operate in tight and narrow spaces. The H stabilization also guarantees an excursion of the stabilizer to allow the overcoming of obstacles (eg, sidewalks) up to 220 mm, much higher (83%) than A + A version (120 mm). CTE will unveil at Bauma the new variable jacking system for this model: stabilisation could be done both in shape or extended, and also only by left side or only by right side. There are more choice for different sites.
Truck-mounted platform ZED 23 JH: unveiled at last 2012 Saie Exhibition, truck-mounted platform ZED 23 JH was born as a sister of ZED 21 JH with the aim to repeat the main succesfull characteristic: Jib, increased capacity of 250 kg, double articulated arm, compactness, clean top boom. ZED 23 JH is the only one truck-mounted platform on the market that reaches 23 m of working height with flyboom and with 250 kg of unique loading capacity. The flyboom allows to easily overcome obstacles and to work in narrow spaces, it has 10° positive angle. The unique capacity of 250 kg throughout the whole working area means that is an easy-to-use platform, without any electronic limitations and it is ideal for rental companies. Also this model has the patented H stabilisation system with connecting rods: one movement for stabilisation, compactness, easily overcome obstacles. The platform is more compact and less bulky: the telescopic boom is parallel to the articulated boom. The tubes are positioned inside the boom and result to be repaired and then protected. The flyboom inclination has been increased from 110 ° to 145 °. To ensure better visibility and easy of use, the controls are positioned tilted towards the operator and repaired by new protection panel very ergonomic. A lighter turret and swivel attachment boom were redesigned to always reach the standard, kerb weight of about 3,400 kg of Euro 5 (Italian version). CTE decided to use new material (Docol 1200) 2mm thick instead of 3mm that guarantees same stability but with a lower weight.
Track mounted platform spiderlift TRACCESS 230: reaches 23 m of working height with an outreach of 12 m and a loading capacity of 200 kg throughout the entire working area. Is the most compact of its category and thanks to its small dimensions (78 cm of width and 1,99 m of height), Traccess 230 can cross the doors. With 4 different working areas, it’s the best platform for activities in narrow spaces and that required special stabilisation, like in spaces between trees or in dirt roads. It has also a jib of 2,1 m and a positive angle of 10°. Thanks to the “Z” shape of the boom, the machine has zero tailswing in all working position. This makes it ideal for working in confined spaces and on the streets.
Truck-mounted telescopic platform B-Lift 230 pro H: it reaches 22,5 m of working height with an outreach of 12 m and a maximum loading capacity of 250 kg. It has a telescopic boom (4 elements) with main boom and 3 telescopic extensions and H stabilisation system. Proportional ergonomic joysticks offers smooth simultaneous multiple operations.
Truck-mounted telescopic platform B-Lift 390 High Range: being the pride of the whole B-LIFT line, the High Range, with its machines from 26m up to 62m, is a new platform line able to meet the requirements of different segments of various markets. Through the integrated projects and brilliant performances these machines are able to compete at a global level with the main competitors. Big variety of accessories for the most demanding uses. The model B-Lift 390 High Range reaches 39 m of working height with 26,3 m of maximum outreach and 450 kg of maximum loading capacity. It has a telescopic boom (4 elements) with main boom and 3 telescopic extensions and H stabilisation system. Proportional ergonomic joysticks offers smooth simultaneous multiple operations.
CTE team wait for you at Bauma Exhibition from April 15th to 21st, external area F11, stand 1102/4.
Source: Marketing Dept. CTE Spa