16 March 2022, 10:58
In the “Technological Innovation”, the smart S3 EVO conquers the first prize
Innovation and safety for CTE are areas that go hand in hand, supporting each other in the development of new technologies that are continuously improving for work at height.
And so, on Thursday 10 March, at the IAPA Awards 2022 in London, CTE was awarded in the Technological Innovation category with S3 EVO.
Born as an evolution of the previous S3 Smart Stability System (launched on the market in 2015), S3 EVO is now the most advanced technology for the real-time performance management system of MEWP, entirely managed in CAN BUS mode to offer greater efficiency, height stability and reliability.
The software that manages the S3 EVO is a project entirely conceived and developed by CTE, designed for the range of CTE ZED, CTE B-LIFT truck mounted platforms and for the CTE TRACCESS * spiders (* currently only available on TRACCESS 270).
FOCUS ON S3 EVO
With S3 EVO the operator works at height with the certainty of being "safe". Thanks to the graphic display and LEDs, the interface facilitates user-machine communication. In fact, the system continuously monitors the configuration of the platform (position of the boom, capacity in the basket, stabilization) and communicates which maneuvers are allowed in compliance with the position of the boom and the stabilization area, and any information relating to the platform parameters.
The new CTE S3 EVO system offers numerous advantages for the operator in terms of:
• Safety: the display on the control station allows you to always have the platform parameters under control during the work phases. The system will block any unauthorized maneuvers (outreach beyond the stability area of the machine or excessive capacity in the basket) based on the configuration of the machine (stabilization, weight in the basket).
-
Productivity: the LEDs on show the maneuvers permitted based on the position of the boom, the weight in the basket and the stabilization area immediately recognizable.
-
Ease of use: the position of the joysticks and levers allows you to comfortably perform the desired maneuvers.
-
Optimization of space and performance: it allows the platform to be easily stabilized according to space requirements and then to work at height in total safety, with continuous control by the system to always guarantee the maximum permitted performance.
-
Working areas management: working areas are infinite, and the operator does not have to worry about checking the position of the boom or the stabilizers since the system automatically always guarantees maximum safety, capacity, height and outreach performance.
THE NEW FEATURES
These are functions that allow you to configure the platform according to the needs of the customer, who can therefore benefit from greater productivity and safety in the workplace.
We mention some of the new features introduced:
-
AUTOMATIC STABILIZATION: The operator can, by selecting a single button, stabilize the platform both from the basket and from the ground.
-
“VIRTUAL ROOF” Allows a maximum working height to be set that can be reached while maintaining maximum outreach performance.
-
“ZTS” (Zero Tail Swing): limits the opening of the pantograph and avoids rear extension past the dimensions of the vehicle with the boom, so as not to occupy the roadway and cause any collisions.
All options are developed by CTE Special Project Division in agreement with the customer.
CTE Connect in S3 EVO
Thanks to this technology, each CTE platform can be connected to the cloud and thanks to CTE Connect it will be possible to have optimized fleet management, remote monitoring, settings and assistance interventions.
Source: CTE Lift