Filters
Go back

Kögel presents a full construction portfolio at bauma 2013 in Munich

At this year's bauma in Munich, Kögel will be presenting its portfolio for the construction industry for the first time since 2004. Between the 15th and the 21st of April 2013, national and international visitors will be able to experience Kögel's wide range of construction products at the Kögel stand (Stand 310, Hall B4) and in the atrium between Halls A4/A5 and B4/B5. The exhibits are optimally tailored to the requirements of the sector and offer lasting added value in various regards.

Advertisement

True to the fair's motto "The peak of excellence", Kögel will be presenting product highlights which meet the demands of the construction industry: Quality and reliability.

Kögel highlights at bauma 2013 in Munich:

The Kögel 2-axle tipper trailer

The highlight of the bauma at the Kögel stand is the 2-axle tipper trailer with its 24m³ load volume. In this exhibit, Kögel will be showing off a clever mix of materials with a 4mm-thick Hardox-450 base trough and side walls made from aluminium. The advantage of the steel trough with lightweight walls as compared to the purely aluminium trough is that it can be used continuously for more than ten years, whilst the aluminium trough needs expensive repair work every two to three years. The 2-axle tipper is available in two versions, with a load volume of 24m³ or 27m³. It is particularly suited to the hardest of applications on building sites and in gravel pits. Naturally, the 2-axle tipper trailer with aluminium walls is optionally available in different floor thickness combinations.

The Kögel 3-axle tipper trailer

In the atrium, Kögel will be presenting a 3-axle tipper trailer with a load volume of 27m³. The exhibited model is the variant with a 4mm thick floor, back wall made from tempered Hardox 450 steel, and side walls made from extra-strong, 3mm S7090 steel sheet. The tipper trailer has an impressive range of innovative features for use during daily building work: For example, a five-stage tipping cylinder with an angle of 48 degrees helps to provide quicker unloading. Of course, the 27m³ tipper trailer is also available in various different wall thickness combinations. Thanks to the modular concept, simple, quick and cost-effective replacement of the tipper body components is possible at any time. There is no need to fit expensive wear plates.

The Kögel Multi

At the outside part of the fair, visitors will be able to wonder at the Kögel Multi. This extremely flexible trailer is particularly suitable for the building materials transport business and for weather-resistant freight. The platform semi-trailer has a reinforced chassis and a semi-trailer load of 15 tons in order to meet the increased load requirements in the construction industry. The aluminium drop sides are easy to remove from the hinges when required for the usage at hand. This makes the Multi ideal for transporting different building materials such as steel mesh, goods on pallets, and concrete parts. The exhibition piece is fitted with Kögel's new, optional MODULASI load-securing system and has a show load which is restrained accordingly.

The Kögel flat-bed semi-trailer

Kögel's third vehicle to be displayed outside will be the 3-axle flat-bed semi-trailer. The welded flat-bed semi-trailer has an impressive offset plateau, high tapered bed, and low tare weight. This makes it ideal for transporting diggers, wheeled loaders, construction machines, and heavy implements. Thanks to a moveable king pin, the flat-bed trailer is perfect for 2- and 3-axle tractor units. The exhibited model shows off the standard corrosion protection feature: The frame of the 3-axle flat-bed semi-trailer is sand-blasted, primed, and fully painted. The drive-up ramps are hot-dip galvanised. Optionally, the frame of the Kögel 3-axle flat-bed semi-trailer can also be hot-dip galvanised.

Your contact for any questions about this press release:

Volker Seitz

Head of Communication

Tel: + 49 82 85 88 – 12 3 06

Fax: + 49 82 85 88 – 12 4 24

volker.seitz@koegel.com

 

Patrick Wanner

Press Aide

Tel: + 49 82 85 88 - 12 3 01

Fax: + 49 82 85 88 - 12 4 24

patrick.wanner@koegel.com

Source: Kögel