Magni TH at Bauma 2016

Magni TH will be present at the next Bauma edition at booth FS 1107/9 with a surface of 670 sqm. Many models from both ranges will be displayed and indeed the 39 meters will be the most interesting one.

Advertisement

On our stand it will possible to see one RTH 5.23 Smart, compact chassis and pivoting stabilizers, one RTH 5.25 Smart S, compact chassis and scissors stabilizers, one RTH 5.26S, one RTH 5.30S, one RTH 5.35S and RTH 5.39S, medium size chassis and scissors stabilizers.

There will be also an HTH 30.12, as representative of heavy telescopic handlers.

It will be also available on the ground a working cab to be tested by visitors.

From our 2nd edition of Bauma we expect to receive even more visitors with the result of more visibility for our products also because this year we will have a more central position booth.

We expect to widen even further our dealers number world wide to reach a better density on our sales network and to be nearer to our costumers.

On our booth will be present main personalities of our company, from technical, sales, aftersales and even spare parts departments.

Moreover as a sign of the tradition of the made in Italy there will be an Italian catering for all our customer.

Smart S Range: Compactness and flexibility

From the first models of “Smart” range with pivoting stabilizers, has developed the newborn “Smart S” range which is comprehensive of 21m, 23m and 25m models, built on the same “Smart” compact chassis but with scissors stabilizers which grant more flexibility and better lifting performances; it is in fact true that with these models you can always stabilize the machine in gauge, without even the need of extending outriggers.

These models were commercialized already in 2015 but the official presentation will take place at Bauma 2016.

5.39S: Innovation, height and performance

After RTH 5.35 S Magni Telescopic Handlers has overtook itself projecting and manufacturing an even higher model: the RTH 5.39S, which is now the highest working height telescopic handler in the world.

This brand new model, which will be unveiled for the first time at Bauma 2016, has some very special features:

1. The chassis is just the same of RTH 5.30S and has been reinforced to resist the big strains to which the machine is exposed in working at such an height, in fact this model, at 38,7 mt, has a maximum lifting capacity of 2 tons; in fact this model allows to work on a building up to the 13th floor.

2. The transmission is composed of a Euro 4 final Mercedes Engine with 170 kW/ 231 hp, one Bosch Rexroth hydrostatic piston pump and a Bosch Rexroth hydrostatic motor.

3. The hydraulic circuit is load sensing with 350 bar operative working pressure and face seal fittings connections and consists of a Bosch Rexroth hydrostatic piston pump and a 7 elements Danfoss distributor with SIL 2 safety standards, with double electronic check of the position and of the direction of the spool. Another small distributor from Bosch is installed to manage stabilizers.

4. The cabin reflects the standards of all RTH machines: it is pressurized with 100% inlet air filtration, air conditioning, panoramic windshield from bottom to top, double electro-proportional CAN BUS joysticks, ROPS and FOPS certification, Magni Combi Touch System (MCTS) which is a touch screen interface to the operator which allows to manage the whole machine through 5 main pages, it guides operator with written messagesduring the use of the machine and it is very efficient for auto-diagnostics in electric and electronic trouble shooting.

5. The patented boom: this is one of the biggest innovations of this model since it consists of 6 elements with 2 cylinders for extension placed outside the boom itself, and inside there are just hoses and pipes. In this way hoses have more available space to move during extension and retraction of the boom and this avoids accidental breaks.

Another peculiarity of the boom is the way in which it is managed by the software: the first 4 sections are activated by the cylinder placed on the upper side of the boom and they move proportionally with the chain extension system. The 5th element, which is the biggest and the heavier, is managed by another cylinder placed on the lower side of the boom, which works in a proportional way to the boom angle; this means that the more the angle increases the more the 5th element extends. This extension system has been developed to keep a good load capacity on the wide horizontal reach, otherwise the weight of the 5th element would reduce too much the load capacity of the machine; things are different in the vertical sense instead since in this case the weight remains close to the load center of the machine.

This model represent for us a great step forward in the market of telescopic handlers; in fact, if equipped with our special men platform it can reach 51 m working height. This special platform can extend the working height of 12 m.

This machine, as all the others of our ranges, is a 3 in 1 machine and if equipped with the right attachment, can perform more than one task: crane, men platform and telescopic handler. In particular 5.39S can substitute men platforms working at a big height and tower cranes when equipped respectively with a basket or with a winch / jib winch, thanks to its competitive price and its versatility.