Meet us at Bauma!

Dinolift Oy, the Finnish manufacturer of DINO lightweight aerial work platforms, is showing a variety of lifts from its current range, as well as something new, at Bauma 2022. DINO RXTE is an extension of the DINO RXT Series of lightweight 4x4 boom lifts with the advantage of silent operation and zero local emissions and low cost of operation. MyDINO is a new digital platform based on Trackunit hardware and software. With MyDINO it is possible to track location, set geofencing and efficiently monitor transfers between rentals.

DINO – RXTE Series

Advertisement

The DINO RXTE supports the European green deal target in reducing carbon dioxide emission. Like on the current diesel variant which will remain in the offering the DINO RXTE Series will include two different working height models of 22 an 28m equipped with either an AGM or Li-Ion battery pack. Being an all-electric MEWP it is possible to take the lift to emission restricted zones inside cities as well as indoors. Operator comfort is supreme as there are no vibrations in the basket. One of the design principles was that there is no loss on drive or boom operation speeds over the diesel version.

The RXTE has multiple lift functions available to be used simultaneously – operating the outriggers simultaneously with drive is also possible. The electric motor has a continuous power rating of 15kW while the peak power is 20kW.

MyDINO – stay on top of your fleet

MyDINO is a new digital platform based on Trackunit hardware and software – further enhanced by Dinolift with the development support from Trackunit. MyDINO provides an insight of the DINO MEWP via the mobile application or the desktop version. It is designed for the end customer / operator of the lift, fleet management as well as technical support at Dinolift, distributor or rental company technical support. With MyDINO it is possible to track location, set geofencing and efficiently monitor transfers between rentals.

In addition, we´ve added channels that are monitored so it is possible to monitor load cases / overloads as well as outriggers being sufficiently set by the operator. Seeing the actual status of the machine helps all technical support persons on the phone serving the customer. CO2 emissions can be also estimated and reported through engine rpm and usage. All these features are available on DINO trailer mounted and spider lifts.

MyDINO is available right now for all new DINO MEPWs and it will be a standard feature on all deliveries in the beginning of 2023. MyDINO is also possible to retrofit to most older DINO models.

Our models DINO 230VTH and trailer-mounted lift 180XTII will also be presented in the Bauma.

We welcome you to come at our stand FS.1306/4