Filters
Go back
Weekly overview Go to photo
Weekly overview

Weekly overview 26.-30.11. 2018

New Cat® 345 GC excavator designed for fuel efficiency, low operating costs, operator productivity, safety, versatility

Cat 345 GC Excavator

The new Next Generation Cat® 345 GC excavator is designed to deliver a balance of performance, reliability, and low-cost operation. The excavator can increase fuel efficiency (cubic yards/tons per unit of fuel) up to 25 percent and lower operating costs up to 30 percent compared to the 349D2. In addition, the new model incorporates significant engineering advances for safety and operator convenience. Read more >>

Premiere at Bauma China: Bauer presents innovative grab and cutter technology

The GB 80 S hydraulic grab system and the BCS 40 cutter system are two new specialist foundation systems that Bauer presented at Bauma China.

Ever since the first Bauma China, the fair that is held in Shanghai in late autumn has been an important date in the calendar of the BAUER Maschinen Group. This year, the Bavarian company is again represented with two booths and presents the latest developments in equipment, as well as proven technology in the field of specialist foundation engineering, on 600 m2 of floor space. On the first day of the fair, visitors to the Bauer booth were able to experience two world premieres up close: The GB 80 S hydraulic grab system and the BCS 40 cutter system are two new specialist foundation systems that Bauer presents at the show. Read more >>

Large 120-ton telescopic crawler crane for small tunnels in Dubai

15 km east of Dubai's international airport, micro-tunneling is being used to develop new terrain. The SENNEBOGEN 6113 E has been working reliably on the shaft for over 2 years.

Advertisement

Dubai is spreading relentlessly into the arid desert region. The terrain is being developed through micro-tunneling projects that insert pipes in the dry earth – a 120-ton telescopic crawler crane from SENNEBOGEN lifts all of the equipment into the bore shafts.
Hosting Expo 2020 will bring new impetus to Dubai. Expo will give rise to a completely new nucleus for technology and companies, which will help to advance diversification in Dubai in the Emirates, where achieving independence from oil remains an important long-term goal. The growth of Dubai continues unabated. Dubai, with a good 3.1 million inhabitants, is the most populous of the Arab Emirates, not to mention the 15 million tourist visitors that come each year. The city is growing constantly and so the need to develop new building plots remains high. Read more >>

Intelligent Wheel Loader Shoveling System along with Six New Products

LiuGong Wheel loader

LiuGong, a world-leading company in manufacturing a full range of construction machines suited for extreme-duties all over the world, proudly announces the launch of 6 brand new products at its 60thAnniversary Celebration.
After 60 years’ development, LiuGong now has 19 product lines including wheel loader, excavator, forklift, bulldozer, pipe layer, motor grader, roller, paver, cold planer, skid steer loader, backhoe loader, aerial working platform, truck crane, lorry mounted crane, off-highway truck, rotary drilling rig, hydraulic diaphragm wall grab, hydraulic diaphragm wall drilling rig, trench cutter & hydraulic cutting and mixing rig. Read more >>

LAFORGE awarded a Gold Medal SIMA 2019

DynaTrac®

For its universal DynaTrac® guidance system for precision farming
At times when precision farming becomes an opportunity for farmers to increase yields, improve profitability and reduce inputs (fertilizers, seeds, chemical products, tillage), LAFORGE innovates and creates a universal guidance interface.
The DynaTrac® interface is positioned on the tractor rear hitch. It slides laterally, controlled by the guidance system (GPS or camera) to ensure a rear implement positioning with an accuracy close to one inch. It allows decoupling of the implement’s motion from the tractor’s one. This eliminates constrains on the implement which eases its positioning and improves tracking of tractor’s trajectory. It has been proven beneficial both on flat and hilly fields. Read more >>

New feeding robot with a battery

Trioliet feeding robot

This is our new feeding robot - the Triomatic WB 2 250 with battery drive. The Triomatic WB 2 250 travels in the stable and across the yard without rails. It follows an induction loop or transponders in the ground.
The new robot is added to the existing Triomatic robot range. The current models are the Hanging Triomatic HP and the Wheeled Triomatic WP on the power rail. The new Triomatic WB (Wheeled Battery) doesn't need a power rail, either in the stable nor outside. The robot works with a 600 volt Nickel battery. Nickel batteries have a lot of capacity, a long service life and do not require a long charging cycle. The robot does not have to stand still while charging. When the robot is docked on the power rail, all functions (driving, mixing, etc.) are performed directly via mains voltage, since all drive motors are three-phase motors. No time and battery energy wasted. This gives the Triomatic WB robot more capacity than comparable DC systems, and it extends the battery life considerably. Read more >>

Live NBalance tool developed by John Deere and Airbus

Live NBalance tool

Advertisement

John Deere’s latest research and development work in association with Airbus has been rewarded with a second silver medal at the SIMA 2019 show, to be held in Paris from 24 to 28 February 2019.
With the Live NBalance tool, Airbus and John Deere are able to offer for the first time live monitoring of nitrogen balance in the field. This joint project is based on a combination of satellite images and machinery data, which continuously observe nitrogen uptake by the crop in each part of the field. During the growing season, the service allows the farmer to make more informed decisions on subsequent fertiliser applications. After harvest, it summarises the total N applied and removed, ready to use for regulation purposes. Read more >>

The specialist of people and material lifting equipment exhibits on BAUMA CHINA

HA16 RTJ – Rough Terrain Articulating boom

BAUMA CHINA is the leading platform for construction machinery, building material machines, mining machines, and construction vehicles in Asia. This key tradeshow which takes place in Shanghai, from November 27th to 30th, is both a platform for product presentations and a grand industry party for communication, cooperation and continued growth. Haulotte, a regular participant, will showcase, on booth A16 (outdoor area), its extensive knowledge to illustrate its capacity to promote its vision. Read more >>

Five-time victory for Jungheinrich at the German Design Award 2019

Jungheinrich reach truck ETV 216

Jungheinrich celebrates the win of five German Design Awards 2019. In the category “Industry“, the reach truck ETV 216i is honoured with Gold. Also among the awardees: our electric pallet truck EJE 116, the Jungheinrich brand’s reorientation as well as the company’s successful trade show appearance at LogiMAT. The jury’s Special Mention was given to the new Jungheinrich Intranet. Read more >>

Source: LECTURA GmbH Verlag

Sponsors