Cutter arm with mulching unit

GIANT offers a cutter arm which is suitable as a front attachment. Unlike when the device is installed behind a tractor or loader, the driver has a good view on his work. The modern cutter arm is perfect for mowing roadsides and ditch borders and pruning hedges and various planting beds.

The cutter arm has a reach of 3,4 meters and has a hydraulic obstacle protection. This protects the arm and the mower from damages. In addition, the cutter arms have a parallel arm geometry. This relieves the driver, because the position of the tool doesn’t has to be corrected when changing the scoop. A mulching unit is mounted on the arm with two hydraulically driven, rotating blades. The mower has a working width of 1,25 meters.

For optimal functioning of the mower, your GIANT has to possess a minimum oil output of 46 L/min (210 bar). In addition, a double gear pump, stabilo system and pro-inching are required. The patented stabilo system ensures high stability of the machine. With the pro-inching function, the mower operates on a fixed rpm and you can control your driving speed with the foot pedal. A leak oil connection and 12 Volt connection on the lifting arm are also required.

The control of the arm and mower will take place in the cabin, through more-lever cable control or single-lever electro-proportional control. With the more-lever principle, you can operate four levers each with a cable connected to cutter arm. You can also choose for single-lever control. For this option you control an electro-proportional joystick, and you can turn the mower on and off. After using the mower you can disconnect the mower with the hydraulic quick change, so the wheel loader can also be used for other activities.