8 September 2015, 10:22
Built of Dammann plant protection device „DIS-PSM“ consists of a multi-chamber system with three spray systems where each chamber direct injection of additional plant protection agents (PSM) without delay times has. The special feature here is the cleaning system but for all chambers of the barrel, the nozzle pipes and injection systems.
In recent direct injection facilities there were problems with the cleaning, in this system, the entire system will be cleaned and the cleaning broth can be collected in a separate container. The broth in this container can then be applied in the field or be pumped to a holding tank. This system is fully automatic and is operated via a terminal.
Likewise, it came with previous direct injection with PSM led to delays. Due to the special involvement in the Dammann fluid system the delay was reduced to a minimum, at a dosing at the maximum allowable under +/- 5%.
The particular advantages of this system are in addition to the special cleaning the saving of plant protection, the exact dosage of the agent and the easy cleaning with the possibility to dispose of the broth professionally.
Each individual system can be used individually, either the barrel is filled with water, or it is filled a basic broth. The injection is then as specified additional plant protection agents with in the nozzle line, here the reaction times are very short..
Specifications demo: