Go back

LIKUFIX quick-change system available for other Liebherr wheel loaders

As can be seen here with an L 507 Stereo, the LIKUFIX hydraulic coupling is safely and robustly installed on the quick coupler.
Liebherr Europe
Go to photo
As can be seen here with an L 507 Stereo, the LIKUFIX hydraulic coupling is safely and robustly installed on the quick coupler.

IMAGE SOURCE: Liebherr-Werk Bischofshofen GmbH

  • LIKUFIX enables hydraulic equipment to be changed safely and conveniently at the push of a button from the cab

  • Previously: LIKUFIX available for medium-sized wheel loader series

  • New: LIKUFIX also available for four small wheel loaders and several XPower® wheel loaders

  • Note for journalists from North America: Only large and medium-sized Liebherr wheel loaders are available in North America!

The fully automatic LIKUFIX quick-change system, an in-house development by Liebherr and well established in Liebherr hydraulic excavators, has also proven itself in the medium-sized series of wheel loaders in recent years. A solution that truly comes into its own in operations involving multiple working tools. The LIKUFIX quick coupler system allows the operator to safely and conveniently change mechanical and hydraulic working tools at the push of a button from the cab.

Liebherr is increasing the availability of its fully automatic LIKUFIX quick-change system for additional wheel loader models. LIKUFIX is now available for the two compact loaders L 506 and L 508, for the two stereo loaders L 507 and L 509 as well as for the XPower® large wheel loaders up to the L 580. As before, LIKUFIX is still available for the medium-sized Liebherr wheel loaders L 526, L 538 and L 546.

Thanks to LIKUFIX: Quick and safe equipment changes when operating a wheel loader

Thanks to LIKUFIX, efficient and safe switching between different hydraulic working tools is possible. <br>Image source: Liebherr-Werk Bischofshofen GmbH


The smaller Liebherr wheel loaders from the L 506 Compact to the L 509 Stereo are known as versatile all-rounders. With LIKUFIX the flexibility increases even further. The machine operator can switch, for example, between a hydraulic 4-in-1 folding shovel, a forklift or a sweeper within seconds at the push of a button. The hydraulic lines are connected automatically and reliably with LIKUFIX which means no valuable time is lost.

Working with hydraulic tools such as high dump buckets, buckets with hold-down devices, log grapplers or separator buckets is typical for larger Liebherr wheel loaders. This is why Liebherr also offers its fully automatic quick-change system for larger wheel loader models. LIKUFIX makes it possible for the machine operator to easily change these and other tools at the push of a button from the cab. This increases safety, because when changing equipment, there is no need to leave the cab and therefore no risk, for example, of going out into the site traffic at a recycling yard.Expanded availability: LIKUFIX is now also available for a large number of Liebherr large wheel loaders, such as the L 556 XPower®. <br>Image source: Liebherr-Werk Bischofshofen GmbH

The LIKUFIX quick change system is prepared for tough requirements. The hydraulic coupling is supported by springs. The forces that act on the quick coupler are therefore not transferred to the coupling system. Even with long periods of use, the connections between the hydraulic circuits remain absolutely tight. To make maintenance easier, all moving parts are easily accessible. If necessary, customers can easily carry out cleaning and simple maintenance activities such as changing a seal themselves.

Source: Liebherr-Werk Bischofshofen GmbH

Liebherr L 507 Stereo on LECTURA Specs
Liebherr L 509 Stereo on LECTURA Specs
Liebherr L 556 XPower on LECTURA Specs