New developments in rear-frame lift DH-VOCS

Following up from earlier announcements made at IAA Hannover 2014, the DH-VOCS is now available with 2 new important options:

• 2-piece hinged ramps [option OVP12.A.R] at the outboard platform edge: from a folded stow position on the platform, these ramps can be turned over 90° and raised in vertical position as roll-stops; or unfolded over 190° as access ramps. In the raised position, these hinged ramps are perfectly suitable to prevent roll cages, trolleys, or other wheeled or sliding objects from rolling off the platform edges. At the ground, the hinged ramps can be opened separately, and form a perfect transition from the ground to the platform surface (or vice versa).

• The K9 execution [OVU013.C] with lifting height above the loading floor of the vehicle to max. 1800 mm (depending on vehicle dimensions), is now available with a top flap hinging open over 135° instead of 90°. Thus the free standing height for the operator on the platform is increased, and the comfort during loading & unloading further optimized.

Consult also our earlier newsflashes, where the weight saving advantages of the product family DH-VOCS have been documented in detail.