30 November 2017, 08:00
COMPACT-SIZE – HANDLING ABILITY – COMFORT
The new SPV ACCESS and SPV POWER self-propelled mixer wagon models have been designed to provide farmers with a very compact, low height, easy to handle machine. These SPV models with a single vertical auger are designed with a rear steering axle allowing for a short turning radius. Approved at 25 km/hour, the range features several models to meet the needs of all
individual farmers:
-
SPV ACCESS: 12, 14 and 15 m 3 versions with a 90 hp milling head
-
SPV POWER: 12, 14, 15 and 17 m 3 versions with a 120 hp milling head
New SPV ACCESS/POWER, loading:
-
With 90 and 120 hp, the milling head allows to load all the products used for farming: hay, straw, haylage, silage, beet, etc.
-
Electronic milling head control on the downstroke adapts the loading rate to the fodder density without damaging the structure value.
-
The broad conveyor (650 mm) ensures regular supply of the mixing hopper.
New SPV ACCESS/POWER, mixing:
-
Available in 12, 14 and 15 m 3 versions for the ACCESS model and up to 17 m 3 for the POWER model, the SPV self-propelled wagon features the single vertical auger concept for quick cutting of fibrous products and an aerated mix of the silage-based rations.
-
The hopper is positioned between the two axles and supported on a frame. This assembly allows for low hopper height: 15 m 3 for an overall height of less than 3.00 m.
-
The hydraulically driven mixing auger ensures a variable speed from 0 to 50 min -1 allowing for the hopper to be completely and quickly emptied.
New SPV ACCESS/POWER, feeding:
-
These models are even more compact and feature direct right and/or left-hand side feeding.
-
As an option for narrow passages, a retractable feed conveyor under the hopper is available.
-
For farmers using extra-high troughs, the feeding chutes feature a hydraulically tilting conveyor available in different lengths.
New SPV ACCESS/POWER, comfort and performance:
-
With 170 hp (126 kW), the JDPS Stage A constant speed engine is positioned at the front at 90° with respect to the machine motion. The machine components are accessible for easy maintenance.
-
Depending on the farmers choice the machine can be driven using a joystick or a foot pedal.
-
The cab is fitted with a 3.5-inch VT 30 terminal or a 5.6-inch CCI 50 terminal. Intuitive handling with three work modes: loading mode, feeding mode and travel mode.
-
All KUHN self-propelled mixer wagons feature a comfortable spacious cab with maximum visibility for safety.
Source: KUHN S.A.