Filters
Go back
John Deere - AutoSetup system Go to photo
John Deere - AutoSetup system

Set up your tractor and implement with one click

John Deere’s new AutoSetup system enables farmers and contractors to manage and store all their tractor and implement settings in the cloud.

Advertisement

Operators can easily retrieve the settings when they enter a field, so lengthy setups for machine and field specific settings are only necessary once and further adjustments are no longer needed. The universal storage of cloud based data is unique in agriculture and is not yet possible even in the automotive industry.

Setups of complete tractor and implement combinations are very time consuming and require well trained operators. For complex planting machinery for example, up to 60 display clicks may be necessary, which can mean a loss of productive working time. John Deere AutoSetup allows the operator to activate all settings with one click, once the complete machine profiles are stored. The preplanned job appears automatically on the cab display when the machine enters a field, so all the operator has to do is confirm the details.

All data is also available in the John Deere Operations Centre web portal and so can be used for the entire machinery fleet. In addition, the data is stored in a cloud-based system, similar to the Apple iCloud, which is a new feature in the agricultural industry.

AutoSetup supports the following settings:

  • tractor settings such as pto speed, hitch and hydraulic valves;

  •  implement settings such as sprayer boom height and nozzle selection or slurry tanker tyre pressure;

  • agronomic data such as field boundaries, guidance lines and application maps (ISO-XML is supported through the John Deere Operations Centre);

  • documentation data such as fertiliser and crop protection applications.

Moreover, AutoSetup supports farm and fleet managers by enabling them to organise all jobs in advance, in the office, including application rates and maps plus all tractor and implement settings. The operator in the field can then change settings and adapt them to working conditions if necessary. This allows experienced drivers to optimise the applications and support other operators.

Due to the open system architecture and cloud database, all ISOBUS compatible implements can also be connected to AutoSetup. Currently the system supports Kotte slurry tankers and John Deere trailed sprayers, but other implements can easily be adapted. Manufacturers are invited to the John Deere stand at Agritechnica 2019 in November to check AutoSetup connectivity.

AutoSetup will be available on selected John Deere tractors in the second half of 2020, and it can be retrofitted to models equipped with the latest Generation 4 display. Both the software update required for the retrofit system and the John Deere Operations Centre are free of charge.

Source: John Deere

Sponsors