The highest quality for meeting the highest requirements

U-frame slag pot carrier from KAMAG Transporttechnik with a 130 t payload proving its worth in operations at Jindal Shadeed Iron & Steel in Oman

Advertisement

In order to meet the increasing demands of the steel works regarding the loading quantity, loading height and loading time, KAMAG Transporttechnik developed its biggest-ever slag pot carrier, Type 2802-130, on a U-frame basis. The first delivered model has recently been impressively proving its worth under extreme operating conditions at the Jindal Shadeed Iron & Steel plant in Oman. Optimal use of resources and innovation-oriented are placed high on the agenda of the company - with the KAMAG Type 2802-130, these considerations have been rigorously implemented in terms of slag transportation. The higher payload of the vehicle fully conforms with the trend towards increasing larger converter sizes, and the U-frame design dramatically reduces the pick-up and set-down times.

The 82-tonne heavyweight vehicle is 11.9 metres long, 7.7 metres wide, 4.3 metres high and can transport payloads of up to 130 tonnes. The slag pot carrier is driven by a Caterpillar C15 diesel engine with 403 kW (548 hp) at 2100 revolutions per minute. The single-axle prime mover efficiently pulls the 5.8 metre long and 4.35 metre high slag pot - with a capacity of 45 m³ - and has been newly developed by KAMAG in order to transport the ever increasing loads without any problems. The 2800 series represents slag pot carriers constructed using a U-frame design which are used, for example, for handling slag pots in areas of restricted heights, e.g. driving through production facility doorways. Here, the rear end of the vehicle encircles the slag pot which is then lifted to the designated transport height. A tipping angle of up to 130° is standard. The main advantages of this series are the low pick-up height and short pick-up time. The vehicle can easily be modified for the transportation of molten steel.

Foto 1: 130-tonne payload: the KAMAG slag pot carrier, Type 2802-130, dramatically shortens the pick-up and set-down times

Foto 2: Briefing for the new work equipment: the KAMAG slag pot carrier, Type 2802-130, is designed not only for efficient performance but also for safety and operating convenience