The Kleemann EVO series – powerful mobile crusher plants for flexible application

With its EVO series, Kleemann GmbH offers the whole range of robust crushing plants for the professional crushing contractors - from the jaw crusher MOBICAT and the impact crusher MOBIREX to the cone crusher MOBICONE. All plants are equipped with the latest technology, which makes them particularly suitable for flexible use in natural stone processing and recycling. They are characterised by a high output and cost-effectiveness, combined with low rates of wear.

Flexible plants for high productivity

Advertisement

All EVO machines have a compact design and are easy to transport. This makes them the right choice for work in changing operation sites. The set-up times are short because the hopper walls and side discharge conveyor can be moved quickly into operating position with hydraulic support. During the development of the EVO series, great importance was attached to a productive material flow. The Continuous Feed System (CFS) thus regulates feeding of the crusher as a function of its filling level. If there is too much material in the crusher, material feed is restricted and, when crusher utilisation is low, the feed is accelerated again without a delay. An optimum material flow is thus guaranteed. A further highlight of the EVO plants is the powerful diesel direct electric drive. The crusher is driven directly, and thus with low losses, via a fluid coupling. The integrated generator generates the current for driving the chutes, screens and conveyor belts. This means that the fuel consumption of the plants is significantly lower than comparable plants with fully hydraulic drives.

MOBICAT jaw crusher

The robust jaw crushers MOBICAT MC 100 R EVO and MC 110 R/Z EVO are used both for natural stone extraction as well as recycling. The "R" version offers a vibrating feeder with integrated slotted grate and the "Z" version an independent grizzly. The elevated crusher jaw prevents the formation of blockages in the crushing jaw. The crushing gap is determined conveniently at the touch panel and is adjusted hydraulically. As with all EVO plants, control is by means of a clearly arranged and simple-to-operate touch panel.

MOBIREX impact crusher

The MOBIREX impact crushers MR 110 Z EVO 2 and MR 130 Z EVO 2 are equipped with double-deck grizzlies. As the material flow through the plant becomes wider, the throughput is comparable with that of larger impact crushers. MOBIREX plants are equipped with the award-winning Lock & Turn system, which guarantees safe maintenance. Access to the plant is only possible via a multi-stage safety system and the rotor can be locked conveniently in any position to change the rotor ledges.

MOBICONE cone crusher

The cone crushers MOBICONE MCO 9 EVO and MCO 9 S EVO are mainly used in the secondary or tertiary crushing stage. The "S" version is offered with an optional screening unit. The design of the EVO plants takes all elements into consideration and ensures that all machine components are easily accessible and maintenance tasks are easier to perform. As the tool change of the cone crusher does not require sealing compound, it can be carried out considerably faster than with similar cone crushers.

Plant interlinking for high output

For particularly demanding tasks, the EVO plants can be linked with one another without any problems because they have the same drive system. As an optimum material flow was also a focal point in the development of plant interlinking, such combinations also ensure high productivity. The MC 110 Z EVO and MCO 9 EVO, in particular, are ideally tuned to one another and offer a high-quality end product.