The PROKIT safety system

PERI has further enhanced the PROKIT safety system for applications on open building edges and on the formwork. For attaching the feet for the PROKIT posts on the concrete slab, special screw-in sleeves were developed. Thanks to the coarse external thread, these can be screwed into the fresh concrete by hand requiring only two turns. After the concrete has set, a standard M16 bolt can be screwed into the internal thread. The slab foot can thus be mounted without any subsequent drilling in the hardened concrete and the PROKIT posts can then be easily and safely installed. And with the new PSC sheet piling clamp, the PROKIT side mesh barriers can now also be mounted on sheet piling and Berlin-type pit linings. Fixing with a triple wingnut can be carried out from the top, below and from both sides. The clamp and posts can also be installed in a rotated position.