D-C-D Distance-Control-Dammann

The Herbert Dammann GmbH is presenting at Agritechnica 2015, the new boom control Distance Control Dammann, short D-C-D, the first boom control is controlled with hydraulics and pneumatics. The advantage of a combination of hydraulics and pneumatics is the damping of the pneumatic and the power of hydraulics. In the development of DCD Dammann has placed many demands on themselves, one is not to design the boom so that D-C-D can also be retrofitted on older devices. Good location in the curves, especially at high speeds, for why C~C~A when the linkage is not in the curves. But also the opportunity to work with half working width, the so-called special folding, be possible with the active mode, the D-C-D. And of course the drive over the test track must function properly, because that is always possible without D-C-D with the Dammann Profi boom.

The D-C-D makes a safe syringes with 12 km / h even in hilly terrain possible. The boom is also in tight bends parallel to the plant. And all this only 30 cm at a distance from the plant. The working and lifting height is entered via the terminal and no longer needs to be taught. Depending on the design of the sprayer, the D-C-D can use the D-C-D was developed for all options, whether special folding, flange plates, extra folding joints or angling..

Everything is controlled via a separate CAN bus computer and various sensors on the boom, which control the hydraulics and pneumatics. The operation runs as usual via the ISOBUS terminal of the sprayer, so here is almost nothing changes for the user, which can deploy their applications as usual.