Technical details and data of the exhibition units Atlas Weyhausen at bauma 2013

With the smaller models AR 35 – AR 40 there will be on display:

Advertisement

New: AR 60
This machine has a new diesel engine type Yanmar 4TNV88. The engine with 36,4 kW output corresponds to the actual exi-gencies of TIER IV Interim. Furthermore, the unit has a new bonnet and can be delivered with operating weights of 4300 ki-los and 4600 kilos. The rate of delivery for the 3rd section was increased to 60 l/min.

New: AR 65e
This loader is equipped with the new Deutz engine TCD 2.9 L4 with DOC (oxidation catalyst), corresponding to the norms of EU Stage IIIB & IV / US TIER 4 Interim & TIER 4. The ad-vantages of the engine can be seen in a passive after treatment and a non-maintenance compared to a particle filter or more simple installations. These engines are having lesser consump-tion of fuel compared to the previous models.

This engine will also be found in the wheel loader types AR 75e, AR75e T and AR 75e S.

In view to the predecessor model AR 65 Super the engine out-put was raised to 55,4 kW and the rate of delivery went up to 64 l/min. The operating weight has been increased to 5000 kilos and, as a consequence the articulated tipping load went up by 160 kilos to 3522 kilos.

Built in serially of the AR 65e are a cyclone pre-cutter and a preparatory device for connecting a climate compressor. Easier reach for maintenance could be achieved and a new cast re-versing lever was installed. In regard to dimensions and torque the data were maintained. The new direction valve and the cab type 31 will be found in models AR65e – AR 85e. As an option the adjustable valve MPR50 with 100 l/min can be equipped acting on the 3rd section serial.

New: AR 75e
Also this model will be equipped with an engine TCD 2.9 L4 and will deliver a power of 56,4 kW at 2300 l/min. The output was increased up to 64 l/min, whereas the operating weight now shows 5750 kilos. In conjunction with a broader wheel base to 2.200mm there is a clear increase of the articulated tipping load by 183 kilos up to 3762 kilos. This type will have the new direc-tion valve as well as the cab type 31 in series.

New: AR 75e T and AR 75e S
These units will be exhibited at bauma 2013 with the engine TCD 2.9 L4 with 56,4 kW. Further technical data are already given in the AR65e.

Models AR 80e – AR 95e Super
These machines have already been on display at Intermat 2012 and are presented now to the German public.
Model AR 80e has an engine TCD 3.6 L4 with 70 kW. The op-erating weight now indicates 6.220 kilos. The loader can be clearly distinguished from the previous model AR 80 in more technical data and with all the parameters is equal to the suc-cessful bigger and even older models such as AR 86 E .

Model AR 85e is driven by Deutz engine type TCD 3.6 L4 with a power of 80 kW. The output comes up to 85 l/min now and can be increased as an option to 110 l/min. The operating weight now shows 7.000 kilos, the articulated tipping load corresponds to 4.998 kilos.

Models AR 95e (TCD 3.6 L4) and AR 95e Super (TCD 4.1 L4) have profited from the task to obtain a clear up-levelled value by an increase of output in conjunction with the new engine tech-nology. Compared to model AR 95 with 85kW model AR 95e comes along with 10kW more power, and it’s torque for in-stance rose by 500 daN to 6900 daN.

Compaction rollers:
The cabin of models AW 1110 – 1140 has been revised. As a result there are a new designed interior and total glass doors.