Go back

bauma19: Our weekly Top 15 innovations compilation | 5 to go!

5 weeks and counting... until the world’s largest trade show opens its gates to the world in Munich again after 3 years. LECTURA compiles the 15 most exciting innovations every week for you - stay tuned and enjoy!

bauma: new Genie® lithium battery


Soon available as an option on selected Genie® GS™ slab scissor lifts, Genie will be showcasing lithium ion batteries for the first time in Europe on the Genie GS-1932 scissor lift at bauma in Munich on Terex booth n° FM 711. Read more >>

E-Power Pipe® nominated for bauma Innovation Award 2019

E-Power Pipe® is a trenchless method for the economic and environmentally friendly installation of underground cables. The new development from Herrenknecht has been nominated for the bauma Innovation Award 2019 in the "Machine” category. Read more >>

CTE introduces CTE B-LIFT 20J, the telescopic truck-mounted platform with flyjib

Imagine the typical features of a truck-mounted platform with a telescopic boom. Now add a flyjib: this is the main feature of the new telescopic truck-mounted platform CTE B-LIFT 20J, a news in the CTE B-LIFT range, showed to the market at the last Vertikal Days. Read more >>

New model of tracked platform, RA31

The new model of tracked platform RA31 has been developed after the great success of the smallest model of the same category, a spider with double telescopic boom and jib, the RA26, launched in 2017. Read more >>

COMANSA to show the new 21LC1050 in Bauma

Tower crane manufacturer COMANSA will be exhibiting in Bauma its latest high capacity model, available worldwide since September 2018. The 21LC1050 flat-top crane can load up to 50 tonnes (110,230 lb), has a maximum radius of 80 metres (262.4 ft), and was designed to provide great performance in large industrial or infrastructure projects as well as in construction with heavy precast or steel structures, including PPVC. Read more >>

World first plus proven quality standard: Heavy haulage made easy

Goldhofer Aktiengesellschaft will be present at this year's bauma with a broad portfolio of vehicles and some exciting new products for the construction and heavy haulage industries. The highlight of Goldhofer’s contribution to the trade show is the premiere of a groundbreaking innovation that will make heavy haulage simpler, more efficient and also more sustainable. Read more >>

Fuso Canter – agility and high payload capacity

The Fuso Canter complements the Mercedes-Benz product range below the Atego. It has earned a good reputation among compact trucks as a rugged, resilient workhorse. Its robust construction, high payload and great manoeuvrability have contributed to this. Read more >>

Long-lasting and flexible: New cold-water HD trailer from Kärcher

A 1000-litre water tank, a powerful diesel or petrol engine and well-thought-out options – the new cold-water high-pressure trailer from Kärcher allows mobile, self-sufficient working. Without water tank refilling, it can operate for a least one hour in continuous work mode. Read more >>

Rapid development the norm at Rototilt

Much has happened since the first serial produced tiltrotator saw the light of day in 1986. Since then, Rototilt has pushed development forwards with a steady flow of improvements to the entire tiltrotator system. “The industry is developing fast and machines are used increasingly more. Read more >>

SINOBOOM to Bring Latest Models to First Attendance at bauma Münich

In SINOBOOM’s first visit to baumaMünich as exhibitors in 2019, they will be bringing six electric-powered machines from their extensive Aerial Work Platform range. The products on show will consist of five scissor lifts, and one articulating boom lift. Read more >>

Atlas Copco’s intuitive, easy-to-use Smart Air Xc4004 controller puts users in complete control

Atlas Copco is set to launch the new Smart Air Xc4004 controller on all its large and specialty air compressors with flows from 20 to 128 m3/min (700 to 4500 cfm) and pressures up to 345 bar (5000 psi). The innovative and powerful controller increases the efficiency of operations by providing powerful insights and features an easy-to-use interface that puts users in full control. Read more >>

The powerful choice for limited access cuts

With its extended guard adjustment and high torque, the new cut-off machine STIHL TS 440 is the perfect choice for limited access cuts. It is designed to allow extended guard adjustability so that the cutting wheel is exposed at the top – ideal when traditional guard positions limit access such as the undersides of pipes in a trench when the ability to excavate is limited. Read more >>

RETHINK: Terex Cranes to unveil new products and technologies at bauma 2019

At bauma 2016, Terex Cranes brought back the Demag brand and at the same time announced that we were revving up our innovation engine.  Over the past three years, we followed that announcement with action – with more than 15 new products successfully introduced, along with numerous developments in service and technology. Read more >>

PALFINGER – already connected to the future

PALFINGER has for many years been 'ALREADY CONNECTED TO THE FUTURE' and a driver of innovation in the field of Customer Lifting Solutions. In keeping with this motto, PALFINGER will be at BAUMA 2019 to showcase the latest developments and innovations in the field of digitalization and service all under one roof. Read more >>

Hinowa at Bauma 2019: Made in Italy on track for eco‐sustainability!

Hinowa’s focus on an environmental approach, implemented both during the design stage and throughout the production process of its machinery, will be on show at the Bauma 2019 trade fair with a “green” stand, showcasing a new range of electric and bi‐ energy machinery along with a host of “eco‐friendly” initiatives. Read more >>

Source: LECTURA Verlag GmbH

Get in touch with LECTURA GmbH



Ritter-von-Schuh-Platz 3
90459 Nürnberg


Dr. Iva Thiel