Filters
Go back
LECTURA Innovation Guide bauma 2019 Go to photo
LECTURA Innovation Guide bauma 2019

LECTURA Innovation Guide bauma 2019

The world’s leading trade fair, Bauma, is the global driving force behind construction industry novelties, presenting the highest concentration of innovations every 3 years. Over 3,500 exhibitors from 55 countries are going to showcase their products on total indoor/outdoor area of 614,000 m2. Moreover, the organizers are ready to pass the 600,000 visitor mark this year.

Check out all the innovations in the following summary and click out to full article on demand.

Alimak Ammann ANDREAS STIHL AG & Co. KG
APEXWAY Atlas Copco AUSA
Bauer Group Bell Benninghoven
Carmix CIFA S.p.A. CM Labs
Comansa Comer CTE
Cummins Daimler AG Deutz
Doka Doosan Easy Lift
EmiControls Erkat Evonik
Fassi Firestone Fritzmeier
Genie Goldhofer Hamm
Hatz Hella Herrenknecht
Hidromek Hinowa Hitachi
Humbaur Hydraram Hyundai
IPAF (International Powered Access Federation) Jekko JLG
JSP Safety Kaeser Kompressoren Kärcher
Kemroc Keestrack KITO
Kleemann KOHLER Komatsu
Kögel Kröger Kubota
Langendorf Liebherr Liugong
MAN Engines Manitowoc Mecalac
Meiller Meritor Merlo
Metso MMM ERBA Makina Mobil Elektronik
MTA Netzwerk Baumaschinen PALFINGER
Peri Pilosio Rockster
Rotar Rototilt Sany
SBM Mineral Processing Scania Schmitz Cargobull
SCHWING-Stetter SINOBOOM Soilmec
Steelwrist Terex Corporation Terex Trucks (Equipment Limited)
TII Group Tobroco-Giant Topcon
Tradecc Transfluid Umdasch Group Ventures
Vermeer VÖGELE Volvo CE
Volvo Trucks Wacker Neuson Wirtgen
WOLFFKRAN Yanmar Zoomlion

Alimak

ALIMAK MC 650 mast climbing work platform system

Alimak introduces wide range of access equipment including new TPL 1000 and TPL 800 single mast transport platforms, MC 450 and MC 650 mast climbing work platforms, upgraded Alimak Scando 650 FC-S high-speed construction hoist (increased payload, size and comfort), SE-H industrial elevator and other aerial work platforms and hoists.

  • Upgrade of the Alimak Scando 650 FC-S

Alimak continues to invest in new technologies and concepts to improve the productivity and sustainability of the construction industry.
Read full article >>

  • The Alimak MC 650 range

A powerful new mast climbing work platform system will enter the international access market with the launch of the Alimak MC 650 range at Bauma 2019 in Munich.
Read full article >>

  • The new single mast TPL 800

Alimak is extending its transport platform light range with the new single mast TPL 800.
Read full article >>

  • The new single mast transport platform – TPL 1000

Alimak is extending its light range with the introduction of a new single mast transport platform – TPL 1000.
Read full article >>

Ammann

The Ammann ART 280 Hydrostatic Tyred Roller

Advertisement

Ammann will show more than 100 construction sector products. Their portfolio involves RSS 120-M Shredder, Iron Separator and Screen (3-in-1), ART 280 Hydrostatic Tyred Roller, four ARX Series Light Tandem Rollers equipped with Kubota Tier 4 Final/Stage 5 engines, CBT 130 TB ELBA Concrete-Mixing Plant or ARX 91 Articulated Tandem Roller.

  • The new Products and technology

Ammann’s product lineup at bauma 2019 in Munich will showcase the company’s continued commitment toward sustainability, low emissions and an overall minimal environmental impact.
Read full article >>

  • The new ABC ValueTec Asphalt-Mixing Plant

The ABC ValueTec plant is the perfect fit for business owners who want straightforward processes and the ability to further customise with options.
Read full article >>

  • Ammann RSS 120-M Shredder

The RSS 120-M, to be on display at the Ammann stand, is a mobile machine that prepares recycled asphalt for use in an asphalt plant.
Read full article >>

  • Ammann ART 280 Hydrostatic Tyred Roller

Ammann’s new tyred roller features a new cab and a unique ballasting system that can be quickly and significantly adjusted. Excellent serviceability is another key feature.
Read full article >>

  • The ARX 23-2 T4f, the ARX 23-2C T4f, the ARX 26-2 T4f and the ARX 26-2C T4f

New light tandem rollers from Ammann make it even easier for operators to work next to obstructions such as curbs.
Read full article >>

  • The ARX 91 Articulated Tandem Roller

Ammann has introduced the ARX 91 Articulated Tandem Roller, a machine that is able to compact from thin to thick asphalt layers in fewer passes with its high compaction output.
Read full article >>

ANDREAS STIHL AG & Co. KG

STIHL MS 500i

STIHL will display large portfolio of innovations including the MS 500i chain saw with electrical fuel injection and improved power-to-weight ratio, new cut protection and high visibility suit Protect MS, helmset Advance X-Vent, Dynamic BT ear protectors with Bluetooth function, TS 440 cut-off machine or cloud-based solution Connect Pro.

  • The STIHL MS 500i

The new STIHL MS 500i is the first chain saw with electronic fuel injection and a never-before achieved power-to-weight ratio
Read full article >>

  • The STIHL TS 440 cut-off machine

With its extended guard adjustment and high torque, the new cut-off machine STIHL TS 440 is the perfect choice for limited access cuts.
Read full article >>

  • STIHL connect pro portal

The STIHL connect pro networks tools and ensures optimized workflows and minimized downtimes
Read full article >>

  • The STIHL ear protectors DYNAMIC BT with Bluetooth function

To protect users of gasoline-powered tools from engine noises in the forest, in agriculture or in the garden, hearing protection is essential.
Read full article >>

  • The STIHL Helmset ADVANCE X-Vent

With the Advance X-Vent hard hat set STIHL provides forestry professionals and ambitious private users with premium head protection in a modern, exclusive design.
Read full article >>

  • New cut protection and high-visibility suit STIHL Protect MS

STIHL combines outstanding wearing comfort with high visibility when working on roads and railway lines in the new cut protection and high-visibility suit Protect MS.
Read full article >>

APEXWAY

APEXWAY non-marking white solid tire
APEXWAY is going to showcase new tire solutions for wheel loaders, skid steer loaders, telehandlers and forklifts. It includes new non-marking white industrial solid tires, made of nature rubber, for vehicles operating in risky environment such as scrap yards, glass works, slay steel mills, food factories, covered stadiums or loading fields.

  • The industrial solid tires with highlights of white non-marking solid tire

APEXWAY, a tire specialist from Taiwan, are here at BAUMA 2019 held from 8th-14th April at Stand 553 Hall A6, showcasing our industrial solid tires…
Read full article >>

Atlas Copco

Atlas Copco HiLight Z3+ light tower

Atlas Copco will be presenting new equipment such as the HiLight Z3+ battery-powered light tower, E-air electric-powered portable compressors, QAS 5 generator range, QAS 35 VSG (Variable Speed Generator), Smart Air XC 4004 compressor controller, portable compressors XATS range, Fleet Link telematics system or the LightThePower app.

  • The new Smart Air Xc4004 controller

Atlas Copco is set to launch the new Smart Air Xc4004 controller on all its large and specialty air compressors with flows from 20 to 128 m3/min (700 to 4500 cfm) and pressures up to 345 bar (5000 psi).
Read full article >>

  • The new QAC 1450 TwinPower™ generator

Atlas Copco has announced a new addition to its QAC range of containerised generators, the QAC 1450 TwinPower™ delivers unrivalled versatility,…
Read full article >>

  • The New Atlas Copco QAS 5 generators

Atlas Copco has launched the fifth generation of its flagship QAS generators range.
Read full article >>

  • The new New battery-powered LED light tower

Atlas Copco has introduced its first-ever battery-powered LED light tower. The enhanced performance of the HiLight Z3+ light tower stems from its use of lithium-ion battery technology.
Read full article >>

  • The new range of clean drive technology equipment

Atlas Copco shows the E-air electric-powered portable compressors and the near-silent battery-powered HiLight Z3+ light tower
Read full article >>

  • WEDA submersible dewatering pumps

The range now comprises three families; the expanded WEDA D for dewatering, WEDA S – also expanded - for sludge, and the entirely new WEDA L slurry family.
Read full article >>

AUSA

Ausa - all-terrain forklift platform

Ausa will reveal a new all-terrain range of forklifts with capacities scaling from 2 to 3.5 tons. The new machines feature an innovative design and electronic management, a hi-tech digital display, an ECO Mode/SmartStop systems, FullGrip 4x4 transmission, an enhanced cab visibility by 30% in comparison with the previous models or noise level reduction.

  • The new all-terrain forklift platform

AUSA, the compact industrial vehicle manufacturer, continues to launch new models and innovative functions for the industrial market.
Read full article >>

Bauer Group

The BAUER BG 15 H rotary drilling rig

BAUER Maschinen range consists of BG 23H, BG 33, BG 45 PremiumLine heavy-duty and BG 15H ValueLine rotary drilling rigs as well as MC 96, MC 86, MC 76 duty-cycle cranes. RTG Rammtechnik will show RG 27S and RG 19T pile drivers and KLEMM Bohrtechnik presents KR 704-2E, KR 909-3G, KR 806-3GS and KR 709-3G drillings rigs.

  • Technology for specialist foundation engineering

Whether it is drilling, diaphragm wall, piling or mixing plant technology, visitors to the Bauma booth FN 520 of the BAUER Maschinen Group will once again experience…
Read full article >>

Bell

Bell will launch the B45E 4x4 off-highway two-axle articulated dump truck. The B45E 4x4 offers capacity of 25 m3, nominal payload of 41 tons and It is equipped with Stage V inline six-cylinder engine rated at 390 kW (523 hp) and 7-speed automatic transmission. Moreover, Bell will exhibit the B50E and B20E LPG articulated dump trucks.

  • The new Bell B45E 4x4

With the launch of the new Bell B45E 4x4 at bauma, Bell Equipment will add a new model to its range of articulated 4x4 two-axle ADTs.
Read full article >>

Benninghoven

Benninghoven transportable asphalt mixing plant – type ECO

Benninghoven, Wirtgen Group company, is going to present new ECO 1250 and ECO 3000 (100-320 t/h) globetrotting asphalt mixing plants in container design as well as the TBA 4000 transportable asphalt mixing plant, Hot Gas Generator with Multivariable Dosing System, EVO-JET 2 burner for all kinds of fuel and the Control system BLS 3000.

  • The new ECO asphalt mixing plant

Benninghoven presents the new ECO system concept at bauma for the first time. The type ECO asphalt mixing plant in capacity sizes from 100-320 t/h combines state-of-the-art,…
Read full article >>

Carmix

Carmix 45FX self-loading concrete mixer

Carmix is expanding its concrete mixer range due to the launch of 45FX self-loading concrete mixer. The off-road machine is designed for low-maintenance, user-friendly driving system and comfort travel. The 45FX is 4.5 m high, 7.75 m long and offers 4x4x4 steering as well as mixer steering capacity of 6,100 l with a mix yield of 4.5 m3.

  • Carmix 45 FX self-loading concrete mixer

The 2019 edition of Bauma will be an opportunity for Metalgalante to present Carmix 45 FX.
Read full article >>

CIFA S.p.A.

CIFA ClassicK36C

CIFA is going to present Magnum MK28E, the world’s first plug-in hybrid truck mixer pump, Carbotech K67H (67-meter) and Steeltech K63L (36-meter) truck-mounted pumps as its main highlights. Moreover, Steeltech K42L, Classic K36C, Carbotech K53H/K47H truck-mounted pumps and FiveTech 1500B mixing plant will be shown.

  • The first hybrid truck mixer pump and the new K67H truck-mounted pump

At the stand of the parent company Zoomlion Heavy Industry (outdoor area 905/2), CIFA unveils a world preview of the first hybrid truck mixer pump and the new K67H truck-mounted pump.
Read full article >>

  • The Magnum MK28E

CIFA will present Magnum MK28E at Bauma 2019 (outdoor area, stand FS905/2): less consumption, more respect for the environment, high performance.
Read full article >>

CM Labs

CM Labs unique tandem lift simulation

CM Labs Simulations presents new training technologies featuring Augmented Reality (AR) application providing virtual mobile crane interaction, two training simulations - Vortex Advantage and Vortex Edge Plus, which can run CM Labs’ full catalogue of lifting and earthmoving training packs, and two Experience Training Stations.

  • Augmented Reality (AR) application

New releases include full-team training capabilities and innovative application of augmented reality (AR).
Read full article >>

Comansa

The flat-top crane 21LC1050 will be shown in Bauma at COMANSA’s booth: FS.1103/1.

Comansa’s highlight will be the 21LC1050 flat-top high capacity crane (up to 50 tons) with radius of 80 metres. The crane can be equipped with new CUBE cab with ergonomic benefits designed for better productivity and comfort. Moreover, upgraded flat-top models 21LC660 and 21LC750 will be showcased along with the LCL700 luffing jib crane.

  • The new COMANSA 21LC1050 flat-top tower crane

This 50-tonne flat-top tower crane is another step forward in COMANSA’s strategy to adapt its range to the global construction needs.
Read full article >>

Comer

Comer Industries will show new FC08 and FC08-hd (for heavier machines) rigid differential axles designed mainly for wheel loaders up to 5.4 tons. Moreover the I-S428 electric drives for off-highway application (single and dual drop versions) will be shown along with the PGR 3800, PG 2300 and PG 2800 series of final drives for excavators.

  • New final and slew drives for excavators

Comer Industries will be exhibiting at Bauma (Hall A3 - Booth 225) the smallest of new final drives, the PGR 3800 series.
Read full article >>

  • The new FC08-hd rigid differential axles and I-S428 electric drives

Comer Industries is strongly focused on product innovation as an essential factor for being competitive.
Read full article >>

CTE

CTE B-LIFT 20J
CTE is going to showcase the CTE B-LIFT 20J, telescopic truck-mounted platform with flyjib. The platform, equipped with electronic control systems, provides easy access to hard-to-reach areas. The CTE B-LIFT 20J offers working height of 20 m, outreach of 12.4 m and capacity of 300 kg. Moreover, the S3 Smart Stability System will be shown.

  • The CTE B-LIFT 20J - the telescopic truck-mounted platform with flyjib

20 m of working height, 12,4 m of outreach and 300 kg of capacity, S3 Smart Stability System and…
Read full article >>

Cummins

Cummins engine B6.7 Stage V

Cummins will showcast 3.5-ton Hyundai excavator prototype powered by BM4.4E flexible battery modules (35 kWh total), F3.8 power unit and QSK60 engine (1398-2125 kW/1875-2850 hp) from the mining line-up. Moreover, Stage V engines will be represented by B6.7 rated at 237 kW/326hp, offering 30% higher torque than Stage IV.

  • Stage V progress

Stage V continues to be a key focus for Cummins Inc. at Bauma 2019.
Read full article >>

  • Electric prototype mini excavator powered by Cummins BM4.4E

Cummins Inc. announced it will feature an electric prototype mini excavator at its stand (A4-325) at the Bauma show.
Read full article >>

Daimler AG

Mercedes-Benz Actros

Daimler is going to exhibit 22 Mercedes-Benz and Fuso construction vehicles under the slogan “Trucks@Work”, including 6 vans, 13 trucks and 3 special-purpose vehicles. The range consists of the Actros, Arocs and Atego heavy-duty trucks, Unimog, Zetros and Econics special vehicles and Citan, Vito, Sprinter, X-Class and Fuso Canter vans.

  • The innovative strength and performance of Mercedes-Benz and Fuso commercial vehicle brands

From delivery vans to light, medium and heavy-duty trucks to heavy-duty tractor units and individually adapted special-purpose vehicles, Daimler will be showing a total of 22 vehicles…
Read full article >>

  • The new Actros

The highlights at the Mercedes-Benz Bauma stand are the new Actros and Arocs truck series, which set standards in terms of safety, efficiency and performance.
Read full article >>

  • The new Arocs

Mercedes-Benz developed the Arocs series specifically for the construction industry and presented it to the public for the first time in 2013.
Read full article >>

  • The Atego

Besides the Actros and Arocs, the powerful A-Team from Mercedes-Benz also includes the Mercedes-Benz Atego.
Read full article >>

  • Unimog, Zetros and Econic

The Unimog is a living legend and a versatile working machine, indispensable in construction. The Mercedes-Benz Unimog U 4023/5023 offers unsurpassed off-road characteristics and extreme ruggedness.
Read full article >>

  • The Fuso Canter

The Fuso Canter complements the Mercedes-Benz product range below the Atego. It has earned a good reputation among compact trucks as a rugged, resilient workhorse.
Read full article >>

Deutz

E-DEUTZ Hybrid

The E-Deutz project is featuring a hybrid drive consisting of TCD 2.9 diesel engine, e-machine, battery and power electronics. Moreover, 4-cylinder TCD 5.2 diesel engine is having a world premiere and Deutz is launching four 6-cylinder diesel engines (9-18 l), featuring TCD 9.0, 12.0, 13.5 and 18.0 for heavy off-highway applications.

  • The modular product kit combines conventional and electric drives

DEUTZ will be exhibiting a modular product kit for diesel, gas, hybrid and electric drives at its stand, measuring over 400m2, at Bauma 2019
Read full article >>

Doka

Doka AR-VR app - Doka solutions in augmented and virtual reality

Doka presents construction site products such as the two-level Engineering Tower, DokaXact sensor-based system, AR-VR app (augmented/virtual reality), Concremote digital measuring system, Free Falcon personal fall-arrest system, Framini formwork system or DokaXlight (framed), DokaFlex Xbrace (timber-beam) and Doka Monolithic formworks.

  • The newest products, services and innovations from the world of formwork

Under the heading "Our contribution to increase productivity on the construction site", the Doka Campus will be presenting the most recent products,...
Read full article >>

Doosan

Doosan DX800LC-5B the 80 tonne excavator

Doosan’s machinery portfolio consists of Stage V mini excavators DX27z, DX35z, DX62R-3, DX63-3 and DX85R-3, material handling excavator DX250WMH-5 (25-ton-class), Stage V excavators DX300LC-7 (30 t) and DX800LC-5B (80 t), Stage V articulated dump trucks DA30 (30 t) and DA40 (40 t) as well as wheel loaders DL280-5, DL420CVT-5 and DL580-5.

  • The new range of Stage V mini-excavators, material handler, Stage V excavators,  Stage V compliant articulated dump trucks and  wheel loaders

Doosan Construction Equipment will be showing a wide range of new products for the first time at the Bauma 2019 exhibition.
Read full article >>

  • New Doosan Portable Power Products

Doosan Portable Power (DPP) will be showing several new portable compressor and generator products for the first time at Bauma 2019.
Read full article >>

Easy Lift

Easy Lift tracked platform RA31

Easy Lift company is going to showcase the RA31, new tracked platform. The RA31 offers working height of 30.1 m, outreach of 14.5 m, basket load of 230 kg, overhang of 15 m or the extending tract. The platform is powered by either combustion engine plus electric motor or hybrid version that adds the lithium battery - the RA31HY type.

  • The new tracked platform RA31

The new model has been developed after the great success of the smallest model of the same category, a spider with a double telescopic boom and jib,...
Read full article >>

EmiControls

EmiControls biggest dust controller V12s

EmiControls company is going to showcase the V12s dust controller silent unit offering water flow of 16-100 l/min, two speed levels and range up to 55 m, which makes it suitable for work in the city centres or low noise level areas. Moreover, the V22Orca all-season hybrid dust suppression machine designed for colder climates will be shown.

  • The new restyled V12

The biggest difference is the size. The new V12s is much smaller, making it easier to transport and integrate into existing systems, yet with the stability and robustness to operate in challenging conditions.
Read full article >>

Erkat

Erkat cutting wheel

Erkat presents new dust extraction systems for rotary drum cutters, featuring the usage of water spraying, designed for cutting heads ER 100 to ER 3000. Moreover, upgraded flexible transverse drum cutters with a cutting wheel, longitudinal drum cutters, auger drive units, stump grinders as well as soil mixing cutters will be shown.

  • future-oriented dust extraction systems for rotary drum cutters

Erkat has been renowned within the industry for its robust, high-quality special cutter attachments for almost 20 years.
Read full article >>

Evonik

A current DYNAVIS® test project: HITACHI EX1200 crawler excavator in the Kuznetsk Basin, Russia. A hydraulic fluid formulated using DYNAVIS® technology yielded productivity growth (cbm³/h) in coal extraction measured at 7.9%.

Evonik will showcase two new technologies for mining and construction equipment, suitable for road construction, demolition, earth-moving and mining sectors. The DYNAVIS® solution is optimizing the viscosity of hydraulic fluids, achieving up to 20% efficiency. The NUFLUX™ innovative technology enables to formulate industrial gear oils.

  • DYNAVIS® and NUFLUX™ technologies

Construction machine manufacturers will do almost anything to optimize the productivity and service life of their machines, and lubricants are typically not a factor in this process.
Read full article >>

Fassi

Fassi Hydraulic Loading Cranes

Fassi is going to showcase two new mid-range cranes of the XE-dynamic series belonging to 30 tm and 50 tm lifting categories. Both cranes feature electro-hydraulic equipment and improvement on the weight/power ratio. Moreover, Fassi will reveal the EasY.Box key storing solution as well as digital innovations, technologies and applications.

  • The ATN self - propelled aerial platforms

The Fassi Group, has acquired control of ATN, a leading manufacturer of self-propelled aerial platforms on rubber or tracks with electric or diesel engines.
Read full article >>

  • Fassi “DRIVING INNOVATION”

Fassi Gru is looking to the future by adopting digital innovation and mechatronics, introducing applications and technologies to support human labour.
Read full article >>

Firestone

Prototype of the Binder Bivitec with Firestone Airmount isolators.

Firestone is introducing new developments for the vibration isolation and pneumatic to hydraulic application product solutions. These novelties include technologically advanced Firestone Airmount air springs, Marsh Mellow fabric-reinforced rubber cylinders and related products for heavy duty, construction and industrial applications.

  • The full range of anti-vibration solutions

The company to display a full range of anti-vibration solutions for the global construction and mining market as well as for industrial applications.
Read full article >>

  • The updates for Binder+Co screening machines

For 30 years Binder+Co has been mounting Marsh Mellow™ hollow rubber springs from Firestone Industrial Products on its screening machines.
Read full article >>

  • Bivitec for the first time with air spring bellows

This enhancement sets new standards in terms of vibration damping, ensures an even longer lifetime of the system and increases throughput.
Read full article >>

Fritzmeier

Fritzmeier Cabs

Fritzmeier Cabs company presents new solutions such as the GLOBAL CAB safety cab with modular structure (ROPS), augmented reality (AR) applications for training and demonstration on construction sites, noise-reducing headrest system, standardized user interface designed together with the HMI Cluster or the “Driver guidance system 4.0”.

  • The modern, driver-friendly safety cabs

At bauma 2019 Fritzmeier Cabs is presenting just the right solution with its modular Global CAB.
Read full article >>

  • The holography technology

New technologies aren’t just flashy, they can help make processes faster, more economical and more transparent.
Read full article >>

Genie

Genie machines

Full Genie line-up consists of 17 models including: S-45 XC boom lift (15.7 m working height), S-65 TraXTM boom lift (21.81 m), GSTM-1330m electric scissor lift, new Genie fuel-electric (FE) hybrid boom lift (based on Z®-60/37 FE), Lift ConnectTM programme (customer service), Lift GuardTM Contact Alarm system, and much more.

  • New fleet management solutions

Developed in direct response to rental customers’ unique business needs, the new Genie® Lift ConnectTM program is a telematics offering focused on actionable information…
Read full article >>

  • Genie Xtra CapacityTM, telescopic boom lifts, new telematics solutions and new accessories Roosendaal

Focusing on taking the customer experience to the next level, as part of a line-up of 17 products at bauma 2019 – booth n° FM 711,…
Read full article >>

Goldhofer

GOLDHOFER at bauma 2016 (Photo: GOLDHOFER)

Goldhofer’s innovation portfolio contains the ARCUS PK transport system, reveal of a new heavy haulage vehicle concept/technology, VENTUM/BLADEX intelligent transport solutions, STZ-PK 8 low-loader semitrailer with unique steering system, upgraded TU 4 four-axle trailer, updated ALLROUNDER vehicle or the FAKTOR 5.5 high girder bridge.

  • The numerous innovations for the construction and heavy haulage industries

Goldhofer Aktiengesellschaft will be present at this year's bauma with a broad portfolio of vehicles and some exciting new products for the construction and heavy haulage industries.
Read full article >>

Hamm

Hamm pneumatic tyre roller

Hamm is going to display many innovations from the compaction sector such as the HP 180, HP 180i, HP 280 and HP 280i pneumatic tyre rollers, DV+90i VS-OS all-wheel-steered tandem roller with vibratory and oscillating drum, VIO compaction meter for oscillation, “C” compactors for challenging jobs or the new dozer blade for compactors.

  • The new generation of pneumatic tyre rollers

HAMM is showing itself to be as innovative as ever at Bauma 2019. The manufacturer is presenting innovations in all product segments, including a few world premieres.
Read full article >>

Hatz

Hatz B- and D-series engines with electronic injection (E1 technology) for integration into IoT platforms of machine manufacturers and owners.

Innovative E1 technology for air-cooled B- and D-series single-cylinder diesel engines (up to 12 kW) will be presented, featuring electronically-controlled fuel injector. E1 is also available for the flagships 3H50TICD and 4H50TICD of the liquid-cooled H-series engines up to 55 kW. All Hatz engines are Stage V ready.

  • Engine development

With the world's first unique electronic control system for single-cylinder engines, Hatz will present another milestone in engine development at Bauma 2019.
Read full article >>

Hella

HELLA Electronic solutions for construction machinery

Hella will show latest products in the lighting and electronics category such as new design LED beacon, new “Modular Worklight” series, Intelligent Battery Sensors, Radio Remote Control and VISIOTECH projection technology containing LED Projection Module, SL60 LED, Module 50 LED Spot and RokLUME S700 Red warning lights.

  • Innovations for construction machinery and mining vehicles

Lighting and electronics expert HELLA will be presenting its latest products for construction machinery and mining vehicles at bauma in Munich,…
Read full article >>

Herrenknecht

E-Power Pipe nominated for bauma innovation award 2019

Herrenknecht presents the E-Power Pipe®, trenchless method for effective and ecologic installation of underground cables and protection pipes. The core of the system is fully remote controlled tunnel boring machine AVNS350XB, designed for drive lengths of more than 1,000 metres. This method was nominated for the Bauma Innovation Award 2019.

  • E-Power Pipe

E-Power Pipe® is a trenchless method for the economic and environmentally friendly installation of underground cables.
Read full article >>

  • "The future tunnels"

The future is forging its way through the underground, where intelligent infrastructures are being built, future-proof mobility solutions designed and the habitat of…
Read full article >>

Hidromek

Hidromek wheel loader HMK 640WL

Full range of exhibited Hidromek construction machines consists of HMK 70 W electric excavator, HMK 62SS/102S Supra/120B Alpha Greentec backhoe loaders, HMK 200W/145 LC SR/ 220 LC/ 300 LC/ 390 LC HD/ 490 LC HD hydraulic excavators, HMK 600 MG motor grader, HMK 640 WL/635 WL wheel loaders and HMK 130 CS/110 CS soil compactors.

  • Hidromek electric excavator, backhoe loaders, hydraulic excavators, motor grader, wheel loaders and soil compactors

HIDROMEK, which is one of the world's top 50 construction equipment manufacturer, will exhibit its brand new products at Bauma 2019.
Read full article >>

Hinowa

Hinowa - aerial work platform

Hinowa is going to present the HS701 tracked minidumpers with a flat skip with foldable sides and the electric (“E”) version, both designed for challenging environment. Moreover, two other innovations, the LL33 and LL26 bi-energy tracked aerial platforms with lithium batteries and diesel engines will be showcased in the external area.

  • The latest environmentally friendly products - on two stands

Hinowa’s focus on an environmental approach, implemented both during the design stage and throughout the production process of its machinery…
Read full article >>

Hitachi

Hitachi ZX55U-6 mini excavator

Hitachi will showcase the ConSite Pocket app and over 30 machines represented by the ZX210LC-6 super long front, ZX135US-6 with telescopic/sliding arm and ZX210X-6 ICT hydraulic excavators, ZX85USB-6/ZX65USB-6 compact excavators, ZW75-6/ZW95-6 wheel excavators, ZX17U-6, ZX19-6, ZX19U-6, ZX55U-6, ZX33U-6 and ZX26U-6 mini excavators.

  • The ConSite Pocket app

Hitachi Construction Machinery (Europe) NV has introduced a new app that enables customers to manage their machines remotely using their smartphones or mobile devices.
Read full article >>

  • Updated ZW75-6 and ZW95-6 compact wheel loaders

The versatile ZW75-6 and ZW95-6 compact wheel loaders benefit from several enhancements to further improve efficiency, comfort and performance for customers.
Read full article >>

  • The new ZX210LC-6 super long front excavator

The new super long front (SLF) excavator from Hitachi is the optimum solution for maintaining rivers and lakes, as well as slope finishing and landscaping.
Read full article >>

  • The new ZX85USB-6 compact excavator

The user-friendly ZX85USB-6 offers high levels of performance, stability, comfort and easy maintenance.
Read full article >>

  • ZX135US-6 smallest telescopic arm excavator

The ZX135US-6 telescopic arm excavator from Hitachi is the optimum solution for deep excavation on narrow job sites in urban environments.
Read full article >>

  • The ZX135US-6 sliding arm excavator

The new sliding arm excavator from Hitachi is ideal for deep excavation projects in confined spaces.
Read full article >>

  • The Hitachi ZX210X-6 ICT hydraulic excavator with machine control

The first Hitachi ICT hydraulic excavator with machine control in Europe, the ZX210X-6, will have a huge impact on construction and civil engineering projects…
Read full article >>

  • Hitachi ZX17U-6 and ZX19U-6 mini excavators

The new ZX17U-6 and ZX19U-6 mini excavators are ideal for utilities, foundation work, landscaping and indoor demolition or construction projects – and wherever space is limited.
Read full article >>

  • The new Hitachi ZX19-6 mini excavator

Designed to be user-friendly, the new ZX19-6 offers high levels of performance, stability, comfort and easy maintenance.
Read full article >>

  • Hitachi new ZX26U-6 mini excavator

The Zaxis-6 model can be easily transported between job sites with two additional buckets on a 3.5-tonne trailer.
Read full article >>

  • The new ZX33U-6 mini excavator

Thanks to an efficient hydraulic system, the ZX33U-6 is capable of high levels of productivity and fuel efficiency. Like previous Zaxis models, it has a quick cycle time and high workload.
Read full article >>

  • The new ZX55U-6 mini excavator

The ZX55U-6 is fitted with an EGR for reducing NOx and a DPF to reduce particulate matter.
Read full article >>

  • Hitachi new ZX65USB-6 mini excavator

The ZX65USB-6 is equipped with new LED lights – two on the cab and one on the boom. These have a longer lifetime than halogen alternatives for efficient energy use.
Read full article >>

Humbaur

Humbaur HBTZ Tridem

Humbaur is exhibiting large range of construction industry trailers such as the HTS 40K semi-trailer, HBTZ Tridem construction vehicle transporter, HBT 10 multifunctional trailer, HTK 14 and HTK 19 three-way tippers, KTA cable drum trailer and HTL long material trailer. Moreover, Kögel heavy-duty trailers will be presented.

  • range of trailers for the construction sector

Humbaur, one of Europe's largest trailer and vehicle body specialists, is set to showcase a large range of trailers for the construction sector, including some exciting new and redeveloped solutions, at bauma 2019.
Read full article >>

Hydraram

Hydraram Demolition Evolution

Hydraram presents completely upgraded line of demolition equipment featuring the HCC series Demolition Crushers, HCS series Combi Cutters, HSS series Scrap Shears, HFP series Concrete Pulverizers, HFP-M series Concrete Pulverizers with integrated magnet, HRP series rotatable Concrete Pulverizers and HDG series Demolition & Sorting Grabs.

  • Completely renewed line of demolition equipment

Hydraram B.V. has been producing equipment for the demolition and recycling industry since 1993. In 2018 we celebrated our 25th anniversary. 
Read full article >>

Hyundai

HCEE Bauma 2019 booth rendering

The “Hyundai Effect” project features 15 exhibited products including the HX10 A, R18-9 and R25-9AK mini excavators, HX85A CR, HX145 LCR, HX235 LCR, HX220A L, HX300A L and HX900 L crawler excavators, HW140 wheel excavator, HL940, HL960 HD, HL960A and HL975 wheel loaders and new “Tiger Eye” design with Eco Guidance and MG/MC technologies.

  • Six brand new machines

Hyundai Construction Equipment Europe (HCEE) will present at Bauma 2019 15 construction equipment products on the company’s 2,705 m2 stand located in the open- air area FM.812A.
Read full article >>

IPAF (International Powered Access Federation)

IPAF is launching its “global safety campaign” and introducing innovative solutions such as the updated IPAF MEWPs for Managers course - available for the first time as eLearning, sophisticated MEWP simulator featuring IPAF eXtended Reality (XR) Strategy document or the updated safety and technical guidance (Toolbox Talks, magazines).

  • global safety campaign

The IPAF stand is confirmed as 711 in C4 hall of the exhibition site and will offer a chance for delegates to review the updated IPAF MEWPs for Managers course, which is available for the first time as eLearning.
Read full article >>

Jekko

Jekko SPK60

Jekko’s flagship and highlight will be the world’s largest mini crane JF990 (100 tm). Moreover, the SPX120HYB hybrid mini crane, SPX532/SPX312/SPX424 mini spider (crawler) cranes with electric lithium-battery, MPK06/MPK12 minipickers, SPK60 tele-crawler crane, JF40 mini crane as well as the JF365 articulated crawler crane will be shown.

  • The new mini cranes, minipickers, JF Series and tools

New products and technologies will be on display to showcase the increasingly innovative, green and user-friendly corporate range.
Read full article >>

JLG

JLG aerial work platforms

JLG introduces 340AJ, 450AJ and 540AJ electric articulating boom lifts, 2632R/3246R scissor lifts as well as a 1530 concept of Light Weight Electric Scissor Lift. Moreover, safety features SkyGuardTMSkyEyeTM and Enhanced Detection System will be shown together with Mobile Control/AR Simulation apps and 3-foot/3-entry Platforms.

  • The electric construction booms, light weight electric scissor lifts, SkyGuard™ SkyEye™, …

JLG Industries, Inc., an Oshkosh Corporation company and a leading global manufacturer of aerial work platforms and telehandlers, is pleased to announce its exhibit at bauma 2019, held from April 8 to April 14, 2019 in Munich, Germany.
Read full article >>

JSP Safety

JSP Helmet

JSP Safety will reveal two construction equipment innovations. The first one is the EVO®5 DualSwitch™ safety helmet certified to EN397 and EN12492 norms, suitable for construction, climbing and electrical activities. The second innovation is the foldable SpringFit disposable mask with unique endoskeleton structure and Typhoon™ valve.

  • EVO ®5 Dualswitch TM

JSP's EVO®5 DualswitchTM is certified to both EN397 and EN12492 on one certificate, with the ability to change between the two standards easily at the flick of a switch.
Read full article >>

Kaeser Kompressoren

Light-weight M59: The brand-new HATZ Diesel motor in the M59 is a perfect fit for this Made in Germany concept.

Kaeser is going to showcase new Mobilair portable compressors such as the M55 and M59 for the flow rate range of 5 m3. The M59 is equipped with Hatz motor, Stage V compliant. The M250E and M255E have an electric-drive and provide drive output of 132 and 160 kW. Mobilair M171 is equipped with 6-cylinder Deutz diesel engine rated at 129 kW.

  • The new Mobilair M55 and M59 portable compressors

A new basic body, new motors meeting European and North American exhaust regulations, a lightweight version, with polyethylene gull-wing doors, and…
Read full article >>

  • The new models in the Mobilair e-power compressor series - M250E and M255E

Exhaust-free and quiet compressed air production – wherever you need it
Read full article >>

Kärcher

The new HD 9/100-4 Cage from Kärcher

Kärcher company is going to present new cleaning equipment technologies and innovations such as the HD 9/100-4 Cage ultra high-pressure (1000 bar) cleaner, HD 4/11 C Bp battery-powered high-pressure (110 bar) cleaner, cold water HP trailer with 1000-litre water tank as well as the EASY!Force VDE-certified high-pressure cleaning gun.

  • New HD 9/100-4 Cage ultra high-pressure cleaner

Kärcher is adding a 1000-bar machine to its ultra high-pressure Compact Class in the form of the new HD 9/100-4 Cage.
Read full article >>

  • EASY!Force VDE-certified high-pressure cleaner gun

The test experts confirm that the accessories for the high-pressure cleaner make a significant contribution to the relief of the hand and back and that muscles and joints are spared during use.
Read full article >>

  • New cold-water HD trailer

A 1000-litre water tank, a powerful diesel or petrol engine and well-thought-out options – the new cold-water high-pressure trailer from Kärcher allows mobile, self-sufficient working.
Read full article >>

  • Battery-powered high-pressure cleaner for professional use

With the HD 4/11 C Bp, Kärcher extends the area of use of high-pressure cleaners for professional applications practically without limitation…
Read full article >>

Kemroc

KEMROC chain cutter

Kemroc company is going to exhibit ES 110 HD multi-purpose milling attachment for excavators/backhoes/skid steers (20 to 40-ton range) along with EK 110 chain cutter (100 kW), KEMROC Schönberger Injector (KSI) mixer attachment (5 m long), KDS 30 diamond tipper cutting wheel and KST 20 compact stump grinder for excavators.

  • Cutting and Milling Attachments

Confirming its reputation as an innovator in the design of specialist attachments for excavators, skid steer and backhoe loaders, KEMROC has new product ranges…
Read full article >>

  • The KEMROC Schönberger Injector (KSI), a mixer attachment

KEMROC introduces the innovative SCHÖKEM Process for the creation of soil / cement structures at the world’s largest construction exhibition, bauma 2019 in Munich.
Read full article >>

  • The range of chain cutters

KEMROC has expanded its range of chain cutters with the addition of the EK 110. With 25% more cutting force than the smaller model, KEMROC has closed the gap between the EK 100 and the EK 140.
Read full article >>

  • The range of multi-purpose attachments for excavators, backhoe and skid-steer loaders

The KEMROC range of multi-purpose attachments are real all-rounders that can be used in a wide variety of cutting and grinding applications in asphalt, concrete and stone.
Read full article >>

  • The KDS 30

The KDS range of diamond cutting attachments is a completely new product group developed by KEMROC.
Read full article >>

Keestrack

The full hybrid cone crusher Keestrack H6e

Keestrack displays 9 processing plants and a range of tracked technology for mineral recycling and quarrying industries. This includes the B7e and B3e jaw crushers, H6e hybrid cone crusher, R6e impact crusher, R3r fully hybrid impact crusher, K6e scalper, K5e Flip Flow, Feeder/Stacker S1e and the S5c “Solar” solar-driven processing plant.

  • The range of hybrid and plug-in solutions in mobile processing technology

As one of the first manufacturers Keestrack recognized the huge saving potentials and operational advantages of electric drives for highly flexible track-mounted mobile processing solutions with transport weights up to 60 tons.
Read full article >>

  • E-portfolio in mobile crushing

Keestrack will display a total of nine processing plants at Bauma 2019 and shows the entire product range of tracked technology for mineral recycling and quarrying.
Read full article >>

KITO

KITO lifting solution

KITO’s portfolio consists of the robust KITO LB lever hoists suitable for heavy pulling/lifting/tensioning and loads up to 9 tons, compact KITO LX levers hoists for low loads, heavy-duty designed KITO CB hand chain block for cranes with load capacity up to 50 tons as well as the KITO EQ/KITO ER2/KITO ED electric chain hoists for cranes.

  • manual hoists and electric chain hoists

For the first time ever, the company presents its portfolio to the construction industry
Read full article >>

Kleemann

MOBICAT MC 120 Z PRO

Kleemann, Wirtgen Group company, will present innovative solutions for quarries and recycling applications such as the MC 110 Z EVO and MC 120 Z PRO track-mounted jaw crushers, MR 130 Z EVO 2 track-mounted impact crusher, MCO 11 PRO and MCO 9 S EVO track-mounted cone crushers or MS 15 Z and MS 953 EVO track-mounted screening plants.

  • The seven Kleemann mobile crushing and screening plants

High-performance machines and environmentally-compatible solutions for natural stone and recycling applications will be presented.
Read full article >>

KOHLER

KOHLER K-HEM

KOHLER’s highlight is the K-HEM hybrid electrical and mechanical combined power generation unit. It is equipped with a Stage V compliant KDW 1003 diesel engine rated at 18 kW (24 hp) and a 48-volt electric engine providing 15 kW (20 hp) of peak power and 9 kW (12 hp) of continuous power thus over 30 kW altogether without the need of DPF.

  • K-HEM, the new hybrid electrical and mechanical combined power generation unit

In light of the changes that the new emissions directive has brought to the off-road applications sector from 1st January 2019, Kohler has added a product…
Read full article >>

Komatsu

Komatsu promotes over 30 products ranging from versatile MR-5 mini excavators to a powerful PC4000 mining excavator. This includes dash 8 backhoe loaders (e.g. WB93R-8), dash 11 excavators (PC240LC-11), dash 8 wheel loaders (WA320-8), hybrid excavators HB215LC-3/HB365NLC-3 (Stage IV) or Intelligent Machine Control excavators and dozers.

  • Over 30 Komatsu machines and their attachments

Komatsu is at the forefront of innovative digital and environmental technologies and visitors at bauma will be treated to Komatsu World Premieres, which will be revealed at the fair.
Read full article >> 

Kögel

Kögel 3-axle tipper trailer with aluminium side walls

The highlight of the exhibition is the 3-axle tipper trailer Kögel Trucker Tipper (KTT) designed for day-to-day use with user-friendly controls. Kögel will showcase the four-millimetre-thick floor KTT variant offering loading volume of 24 m3 and Kögel LUXIMA multi-chamber LED tail light as well as special equipment such as a toolbox.

  • Kögel Trucker Tippers

The Kögel bauma highlight for 2019 is the Kögel Trucker Tipper (KTT). Like its namesake, the Kögel Trucker Trailer (KTT), the Kögel Trucker Tipper is tailored perfectly to the requirements of the driver.

Read full article >>

Kröger

Kröger Trailer

Kröger is going to present several innovations such as the push-off semitrailer type SAW32 featuring two-axle design and cargo area capacity of 48 m3, updated hook-lift trailer system RS 21.65/RS 21.70 by MEILLER for Kröger roll-off tippers, redesigned hook arm or the swing limitation function for the HP series heavy-duty dump trailers.

  • News for push-off trailers

Push-off trailers have become firmly established in agricultural use for a long time.
Read full article >>

  • News on the hook-lift trailer

The concept is impressive with its versatile uses and high level of cost- effectiveness anywhere that flexibility is required.
Read full article >>

  • News for heavy-duty dump trailers

Over the past few years, tractor-towed transport technology has become a fixed part of the construction industry.
Read full article >>

Kubota

Kubota engine V5009

Kubota’s range of new power systems includes the 4- cylinder V1505-CR-T diesel engine (33 kW/44.3 hp), 3-cylinder D902-T diesel engine (18.5 kW/24.8 hp), 3-cylinder WG1903 gas/LPG/gasoline engine (35 kW/47 hp), new 09 series diesel engine V5009 (157 kW/ 211 hp, Stage V) with DPF and SCR aftertreatment and new micro-hybrid engine prototype.

  • range of power systems

Kubota’s BUEE, boosted by a record year in 2018, will showcase its most comprehensive range of power systems to date at Bauma 2019, Germany.
Read full article >>

Langendorf

Langendorf - The Flatliner

Langendorf introduces the SB-19 H 95/81 inloader trailer (The Flatliner) with innovative features such as more robust door retainers and ergonomic design. Its loading shift length is 9,500 mm and width 1,550 mm. Moreover, the SKS-HS 24-7.5 half-pipe tipper trailer is going to be shown, equipped with BPS disc brake axles and steel body.

  • The Flatliner – the vehicle for special transportation

In the open-space-area FN 827/1 the Waltrop-based manufacturer with long tradition presents a vehicle from the SB series to the specialized trade professionals.
Read full article >>

  • Steel half-pipe tipper trailer

At the joint booth of Wielton and Langendorf in the open-space-area, FN 827/1 the Waltrop-based company with long tradition presents a steel half-pipe tipper.
Read full article >>

Liebherr

Liebherr 42 M5 XXT truck mounted concrete pump

Liebherr’s portfolio includes the LR 1300 SX crawler crane (300 t), HS 8040 HD duty cycle crawler crane, new EC-B series flat-top cranes (8 units), R 934 crawler excavator (Stage V), 42 M5 XXT truck mounted concrete pump, 125 K fast erecting-crane, A 913 Compact wheeled excavator prototype, DC5 display controller and intelligent systems.

  • Powerbloc: 42-metre truck mounted concrete pump

Liebherr will introduce the completely redeveloped 42 M5 XXT truck mounted concrete pump for the medium range class at Bauma this year.
Read full article >>

  • Liebherr 125 K - the largest fast-erecting crane in its class

The new 125 K has been specially developed for civil engineering requirements such as road traffic bridges and commercial as well as industrial building construction.
Read full article >>

  • Prototype of the Liebherr A 913 Compact Litronic wheeled excavator

This compact wheeled excavator, which complies with Stage V emission standards, is an all-rounder for classic earthmoving work on construction sites where space is tight.
Read full article >>

  • Intelligent assistance systems for construction equipment

Liebherr’s new assistance systems increase comfort and safety in daily operation in a range of ways.
Read full article >>

  • Condition Monitoring, modern drive systems and state-of- the-art device control

Along with the demo app, which allows to capture the current machine condition on the components level, Liebherr presents the drives of the future as well as the new generation of display controllers.
Read full article >>

  • New Liebherr R 934 crawler excavators

The new R 934 model (based on the platform of the R 934 and R 938 models) is presented at Liebherr's trade fair stand alongside an engine which meets Stage V emission standards.
Read full article >>

Liugong

LiuGong wheel loader

Liugong’s line-up of new construction equipment consists of the 909 ECR compact radius excavator, 950 demolition excavator, 848H wheel loader with ERGO transmission, 856H wheel loader (Stage V), 890H wheel loader for European market, 4180D motor grader, 2016A-T electric forklift, TD-15 crawler dozer (Stage V) and TD-25 crawler dozer.

  • The 6 new LiuGong Machines

LiuGong and Dressta will showcase a 20-machine line up of tough equipment designed for the world’s toughest conditions.
Read full article >>

  • LiuGong and Dressta - combined product portfolio

LiuGong and Dressta aim to continue to pursue their strategy which will expand their global operations whilst ensuring that they stay close to customers.
Read full article >>

  • LiuGong and Dressta - the twenty-machine line up of tough equipment designed

bauma represents a unique opportunity for manufacturers to showcase their full line of products and services to a global audience.
Read full article >>

MAN Engines

MAN range of engines for construction machinery

Man is going to introduce new 9-liter off-road D1556 diesel engine offering power ratings from 205 to 324 kW (275 to 434 hp) as well as the 16.2-litre D4276 diesel engine providing power ratings from 450 to 515 kW (604 to 690 hp) for construction machines. Both machines are equipped with modular exhaust gas aftertreatment for EU Stage V.

  • The range of engines for construction machinery

Successful agricultural engine business provides solid foundation; new D4276 and D1556 engine series at Bauma trade fair; future engine developments can draw on commercial vehicle business.
Read full article >>

  • The new MAN 16.2-litre D4276 engine

At Bauma, MAN Engines will be debuting its new straight-six engine, the D4276, with 142 mm bore and 170 mm stroke.
Read full article >>

  • The new 9-litre off-road D1556 engine for construction machinery

At the Bauma trade fair’s media days, MAN Engines will be exhibiting the 9-litre-displacement D1556 diesel engine for construction machinery.
Read full article >>

Manitowoc

Manitowoc at bauma

The company is going to unveil 6 completely-new cranes, but the visitors have a chance to see more than 10 new cranes such as Grove GMK3060L (3-axle) all-terrain crane with 48 m boom, several rough-terrain cranes, Potain topless tower cranes and self-erecting (Hup) cranes and new Manitowoc technologies featuring the telematics systems.

  • Six new cranes and several new lifting technologies

Manitowoc will debut six new models from its Grove and Potain lines at bauma 2019 in Munich, Germany.
Read full article >>

  • The new Grove GMK3060L all-terrain crane

The new GMK3060L is based on its predecessor’s design but has a longer boom (48 m/157.5 ft instead of 43 m/141 ft) and offers the strongest taxi load charts in its class.
Read full article >>

Mecalac

Mecalac TV1200 - Tandem vibrating compaction roller

The Mecalac Group will launch 2 new products. One of them is the TV1200, a tandem vibration compaction roller with a new driving system. The second one, SL900, is the first wheel loader capable of performing the statistical loading. Moreover, Mecalac will exhibit the AS 500 swing loader designed for stability, compactness and versatility.

  • Mecalac AS 500 wheel loader

The Mecalac Group is the only manufacturer of loaders in the world to offer all possible wheel loader variants
Read full article >>

  • TV1200 - Tandem vibrating compaction roller

The Mecalac Group has built its innovative reputation on designing and producing construction machinery for urban job sites.
Read full article >>

Meiller

MEILLER RS26 hooklift

Meiller portfolio consists of the RS26 hooklift, D316 three-way tipper with MZDA 18.13 centre-axle trailer, AK16 skip handler, H450/P536 rear tippers, MHPS heat insulated semi-trailer and Rock tipper for heavy-duty applications. Last but not least, Meiller presents the i.s.a.r. - control remote 3 and Eco-Kupplung innovation (eco clutch).

  • The new product portfolio

Safety and efficiency are paramount as MEILLER presents its latest innovations and products at bauma 2019.
Read full article >>

Meritor

Meritor p600 Tridem

Several products for off-highway and heavy-duty applications will be exhibited featuring the MZ-610 tridem rear and MX-610 front-drive axles mounted on 2 different OEM mining vehicles, variety of wet disc/dry hydraulic brakes, wheel-ends for a range of vehicle configurations and electrified solutions for the material handling industry.

  • New Product Solutions for Off-Highway Applications

Meritor is positioning itself for growth in the global off-highway market by showcasing several new products in Munich, Germany April 8-14 at Bauma 2019, the leading trade show for the construction, building material and mining machine industries.
Read full article >>
 

Merlo

Merlo Roto 40.16 telehandler

Merlo presents 16 models with 8 innovations. These are the PANORAMIC range telehandlers P27.6, P30.10, P35.11TT, P40.13, P40.17 and P120.10 HM, ROTO range telehandlers 40.16 S, 50.21 S PLUS, 50.26 and 50.35S-Plus, Turbofarmer TF 30.9, Multifarmer MF 34.9, MM 135 tool carrier tractor and Cingo M800TD/M8.3 PLUS/M12.3EVO tracked carriers.

  • completely renewed product families

For the Merlo Group, BAUMA 2019 exhibition will be a great moment which will bring visibility to all the efforts that MERLO Group has made in recent years.
Read full article >>

Metso

Metso Lokotrack LT200HP

Metso will be presenting a wide range of new products such as the Lokotrack LT200HP mobile cone crusher plant with direct v-belt drive (Stage V ready), spare parts and wear innovations, new services for the aggregates industry as well as innovations for crushing, screening and off-highway trucks enabling better productivity and safety.

  • innovations for aggregates and mining industries

Metso is introducing a number of new, state of the art solutions for the aggregate, construction, and mining industries in Bauma 2019,…
Read full article >>

MMM ERBA Makina

Headquarters of MMM ERBA Makina

MMM ERBA Makina is going to present a wide range of complete solutions in the sectors of gypsum calcination, gypsum plasters and plasterboard production. Moreover, new project “mineral wool equipment and plants” with an optimal quality – price ratio will be presented as well as new technologies and designs suitable for the gypsum market.

  • solutions for gypsum plasterboard production lines

MMM ERBA Makina was estab¬lished in 2001 by mechanical engineer Mr. Melih Baran KILIÇ, who had long valuable ex¬perience in gypsum plasters and plasterboard production…
Read full article >>

Mobil Elektronik

© MOBIL ELEKTRONIK - 2-axle loader with EHLA® auxiliary steering system

Mobil Elektronik introduces a new version of the EHLA® PLUS electrohydraulic auxiliary steering system, a concept for smaller (2-axle) construction machines. The system meets high requirements of maneuverability and driving stability thus safety and it is approved for use on public roads. It also features new safety steering computers.

  • EHLA® PLUS

Electrohydraulic steering systems for rear axles have been standard in commercial vehicles and complex construction machinery for many years.
Read full article >>

  • Safety Steering Computer for Extreme Applications

Electronic components in construction vehicles and agricultural vehicles are often subject to extreme requirements.
Read full article >>

MTA

MTA Customizable products

MTA is going to introduce a portfolio of electronic products including the MEC 97 modular electrical center for the distribution of power, new software tools MTA Studio/Core/Speedy/Creator/Gate, SIC “in-vehicle” system, android-based customizable display Leonardo as well as a range of customizable electronic products for the off-highway.

  • electronic products for the off-highway

All dashboards and displays feature very similar hardware and software architectures, elegant design and modern lines, but are different in shapes and sizes, number of LEDs, inputs and outputs,…
Read full article >>

  • An Android-based customizable display for off-highway applications – Leonardo

MTA, a company renowned for the development and production of a wide range of electromechanical and electronic products for the primary OEMs,…
Read full article >>

  • The electromechanical waterproof power distribution unit for off-highway applications - MEC 97

MTA, a multinational company, headquartered in Italy, known for the development and production of a wide range of electromechanical and electronic products sold to major OEMs,…
Read full article >>

  • a wide range of electromechanical and electronic product

MTA Core is the result of an important development project carried on by MTA electronic department engineers…
Read full article >>

Netzwerk Baumaschinen

Netzwerk and the partner companies are going to introduce new safety solutions such as the Backsense radar sensor system and Cross-Traffic Camera System from Brigade, 3D terrain mapping app by ITK Engineering, 360° Surround View System from MEKRAtronics, 3D vision sensors and LiDAR sensors from SICK or the VISION ZERO strategy by BG RCI.

  • Network Non Road Mobile Machinery

At bauma 2019, the world’s largest construction fair, the Network NRMM (“Non Road Mobile Machinery“) invites all interested parties to get informed about the state of the art technology…
Read full article >>

  • Brigade’s Backsense radar sensor systems

The Construction Industry, as one of the most dangerous working environments, has long been a target for Brigade in pursuit of our Mission to avoid collisions and to save lives.
Read full article >>

PALFINGER

Palfinger loading crane

PALFINGER will showcase around 20 different installations including the PCC 115.002 crawler crane, PK 37.002 TEC 7 crane and 3 more TEC units, PK 24.001 SLD 6/PK 21.501 SLD 3 cranes, P 370 KS E el. operated access platform, PK 18502 SH loader crane, 2 heavy-duty cranes, PK 200 AXE and 5 more access platforms or PHT 20 TEC 5 hookloader.

  • More than 20 different installations on two trade fair

PALFINGER has for many years been 'ALREADY CONNECTED TO THE FUTURE' and a driver of innovation in the field of Customer Lifting Solutions.
Read full article >>

Peri

PERI at bauma 2019

Peri will reveal new developments for formwork and scaffolding technology sector as well as digital solutions and comprehensive service portfolio. This includes the 3-D concrete printing technology, live robot usage demonstrations, Sky Anchor attachments, PERI UP Easy scaffold system, SCS climbing system or PERI Extended Experience App.

  • new developments for formwork and scaffolding technology

The focus is on innovations, practice-oriented system supplements as well as further developments which cover a wide range of applications and target groups.
Read full article >>

Pilosio

Pilosio’s updated construction portfolio consists of large Multidirectional MP structure 10 meters high, vertical wall formworks, Multidirectional MP scaffolding systems for industrial maintenance, T76 BUILDING roofs, systems for heavy duty shoring structures and slabs, lightweight aluminium coverings as well as aluminium mobile towers.

  • The updated range of products

The entire range of products, from formworks and shoring, to scaffolding, has been updated and optimized…
Read full article >>

  • New range of formworks and scaffolding, updated and expanded with a new line of accessories and finishes

The Italian company will be in Munich to exhibit its range of formworks for walls and slabs …
Read full article >>

Rockster

Rockster's most powerful mobile impact crusher - R1100DS with Duplex System and Double-functional Return / Stockpile Belt

Rockster company’s portfolio includes the R1100DS, its most powerful mobile impact crusher. The R1100DS crusher features two new systems; DUPLEX and double functional return/stockpile belt. Moreover, mobile 2-deck scalping screen KSS410, track-mounted stacker KST18 and machine monitoring system (MMS) for all mobile crushers will be shown.

  • Rockster R1100DS mobile impact crusher

The machine combines both innovative systems (DUPLEX and double-functional return / stockpile belt) and as of 2019 it will be equipped with a CAT C9.3B EUR5 engine.
Read full article >>

Rotar

Rotar RSP-series

Rotar presents the RAMPLIFIER® solution for a brand new Rotar RCC Concrete Crusher of the RSP-series. The RAMPLIFIER® technology is installed on the RCC (inside the cylinder rod) providing double the cutting power forces, increasing from 350 to 700 bar. Moreover, upgraded replaceable teeth and longer cutting blades were developed.

  • The brand new RCC Concrete Crusher

Sng new market leading technology it will give double the power and sit at the cutting edge of the market.
Read full article >>

Rototilt

Rototilt tool - Screening Bucket

Rototilt introduces new screening bucket and ripper, made of steel qualities HB450 and HB500, for excavators between 12 and 25 tons. The Tiltrotators R5, R6, R8 and R8 have been upgraded with new worn gear for softer operation and longer service life. Moreover, new sensor solution for Rototilt’s Positioning Solution (RPS) will be shown.

  • The new tool for Rototilts tiltrotator system

Rototilt is introducing a new screening bucket and new ripper to its assortment.
Read full article >>

  • Rapid development the norm at Rototilt

Rototilt has always worked with continuous improvements according to its core values of Precision, Commitment and Added Value.
Read full article >>

Sany

SANY SY500HRD

Sany is going to launch new construction machinery products featuring excavators, mobile port machines and port cranes. New Sany machines are the SY155U short tail hydraulic crawler excavator, SY155W wheeled excavator, SY500 HRD demolition excavator, SY80U hydraulic excavator, H9 reach stacker as well as the SRSC4540G-S reach stacker.

  • three new construction products

After launching of SANY construction products in the European market on Bauma 2016 SANY has won the trust of the customers by supplying a very reliable and strong products.
Read full article >>

SBM Mineral Processing

SBM Mineral Processing - Mixing plant and Crusher

SBM’s portfolio consists of the REMAX 200 mobile impact crusher with electric/diesel-electric drive system, stationary mixing plant TOWERMIX® 2500 ST D8 480 V, twin shaft mixer DKXS 2.50, new SMB jaw crusher, supermobile concrete mixing plant EUROMIX®, new SBM gravel plant as well as the residual concrete recycling plant type RBR-16 ST.

  • Unique product range for mineral processing and concrete mixing technology

Developing innovative products has been at the heart of our corporate philosophy since the foundation of the company in 1950.
Read full article >>

  • Innovations for recycling, mineral processing and concrete mixing technology

The current construction boom cannot be separated from the demand for resource-efficient sustainability.
Read full article >>

  • The new impact crusher - REMAX 200

50 years of experience with electric / diesel-electric drive systems find their way into this highly mobile compact class.
Read full article >>

  • The range of supermobile concrete mixing plants EUROMIX

Efficient production of high-quality site concrete is one of the most decisive factors for the cost-effective realisation of construction projects in any terrain.
Read full article >>

Scania

Scania R 580 XT V8

Scania is going to present 5 trucks in total; 3 representatives of the XT range and 2 New Truck Generation units — G 500 heavy tipper and G 410 with mixer body. All trucks are equipped with Euro 6 compliant engines that can run on diesel, HVO (biodiesel) or gas. These are the updated DC09, DC13 and V8 engines ranging from 280 to 650 hp.

  • The New Truck Generation and XT range

Scania’s launch of the New Truck Generation and XT range has not only introduced robust solutions for the construction segment, it has also been playing an important role in advancing sustainable alternatives for the industry.
Read full article >>

  • Scania range of XT trucks

Since it first introduced the new truck generation in 2016, Scania has added more heavy-duty components for their construction applications in general
Read full article >>

  • Scania engines - updated DC09 and DC13, legendary V8s

On the road to a fossil-free transport industry, most industries and hauliers are still depen¬dent on ICEs to help the world function.
Read full article >>

  • Scania Ecolution

Scania Ecolution can be described as an umbrella for a number of services focusing on efficiency and sustainability.
Read full article >>

Schmitz Cargobull

Schmitz Cargobull sliding tarpaulin

Schmitz Cargobull will be presenting safe and demand-oriented transport solutions for individual tipper trailers and motor vehicle bodies, as well as a comprehensive range of tailor-made vehicle-related services. The highlights are the M.KI truck tipper body and the S.KI AK tipper semi-trailer with aluminium box/round steel body.

  • New plastic cladding for tipper semi-trailers with aluminium box body

The S.KI AK tipper semi-trailer with aluminium box body is now available with a new plastic body cladding.
Read full article >>

  • M.KI truck tipper body

The electrically operated, sliding tarpaulin can be opened and closed easily and quickly by remote control from the driver's cab or from the ground.
Read full article >>

  • The new third generation TrailerConnect® telematics system

Schmitz Cargobull is introducing the S.KI SMART PLUS tipper trailer with the latest trailer telematics system at the BAUMA trade show.
Read full article >>

  • The innovative remote control - via a smartphone app

The app is designed so the driver receives all the necessary information quickly and efficiently on a well-designed display.
Read full article >>

SCHWING-Stetter

 S 65 SXF - SCHWING truck-mounted concrete pump

Schwing-Stetter joint company will introduce innovations such as the Stetter 4.0 twin-shaft mixer, FBP 27 truck-mixer concrete pump, M 3.0 mobile batching plant, S 47 SX III truck-mounted concrete pump with 5-section boom, TP 100 compact trailer pump, S 36 x DirectDrive (with 360° rotation) and the S 65 SXF truck-mounted concrete pumps.

  • The new truck-mounted concrete pump S 65 SXF

The S 65 SXF is a completely new technical design, combined with the well-known quality components from SCHWING that are installed also in other machine types.
Read full article >>

  • M 3.0 Mobile batching plant

The M 3.0 Stetter batching plant is the model for the fast and high-volume requirements of ready-mixed concrete from mobile plants.
Read full article >>

  • The New S 47 SX III truck-mounted concrete pump

The completely newly developed S 47 SX III truck-mounted concrete pump is another new addition to the III series.
Read full article >>

  • The TP 100 compact pump - new mobile power

The TP 100 trailer pump from SCHWING is a completely new development in the field of mobile concrete pumps.
Read full article >>

  • The 111,000th model, an UltraEco, with a special paint

Stetter's truck-mixers are designed for efficiency, performance and economy.
Read full article >>

  • The S 36 X DirectDrive

With the DirectDrive, SCHWING is revolutionizing working with truck-mounted concrete pumps.
Read full article >>

SINOBOOM

Sinoboom aerial work platforms

Sinoboom will present electric-powered access solutions for construction industry. The company will exhibit 6 innovative electric-powered units from its Aerial Work Platform range consisting of 5 scissor lifts and 1 articulating boom lift. Those machines feature small turning cycle, ease of operation, enhanced robustness and stability.  

  • six electric-powered machines from their extensive Aerial Work Platform range

Electric-powered access solutions will be the focus for SINOBOOM at the 32nd edition of the leading construction machinery trade fair.
Read full article >>

Soilmec

Soilmec SR 125 drilling rig

Soilmec is going to introduce new ground engineering equipment including large diameter piles, micropiles and hydromills. New generation of SR drilling rigs features the SR125 High Tech platform, SM drilling rigs for micropiles and anchoring are represented by Soilmec SM-22 and the SC-135 Tiger is the company’s newest hydromill.

  • Large diameter piles, Micropiles, Hydromills

Soilmec will welcome Bauma visitors at his exhibition space (FN522) with comfortable reception areas.
Read full article >>

Steelwrist

Steelwrist bucket

Steelwrist will expand its range of fully-automatic quick-change systems and display an updated version of the Front Pin Lock locking system. New Auto Connection quick couples for tiltrotators, equipped with new V14 self-cleaning electrical connector, are called SQ65 and SQ75/55. Moreover, the ToolRec and Quantum systems will be shown.

  • The new SQ65 and SQ70/55 Auto Connection Quick Couplers

After the very successful market launch of the SQ Auto Connection quick couplers SQ60 and SQ70 in 2017 and the SQ80 in 2018, Steelwrist now takes the next step in this very dynamic product sector.

Read full article >>

Terex Corporation

Demag AC 45 City

Terex Corporation will show products such as the CTT 202-10 flat top tower crane, RT 90 rough terrain crane, Fuchs MHL375F HD/RHL350F/MHL320 material handlers, 883+ triple shaft screener, TF-75L low level feeder, TC-80 tracked conveyor, J-1160 jaw crusher, TTS 620T trommel, Demag AC 45 City/AC 300-6 cranes or 3 new Powerscreen machines.

  • The new CTT 202-10 flat top tower crane

Bauma 2019 attendees will be the first to see the new 10-tonne (11-U.S.-ton) class Terex® CTT 202-10 flat top tower crane.
Read full article >>

  • Rethink Innovation

At bauma 2019, customers can expect a new wave of innovation with more new product launches and technological innovations developed with them and for them.
Read full article >>

Terex Trucks (Equipment Limited)

Terex Trucks hauler TA300

Terex trucks will showcase two new off-highway articulated dump trucks, TA300 and TA400, suitable for construction projects, mines and quarries. The TA300 offers payload of 28 tons, heaped capacity of 17.5 m3 and engine power of 276 kW whereas the TA400 provides payload of 38 tons, heaped capacity of 23.3 m3 and engine power of 331 kW.

  • The updated TA300 articulated hauler

Visitors to the bauma 2019 exhibition in Munich, Germany, will have the chance to get up close to the newly upgraded Terex Trucks TA300 articulated hauler.
Read full article >>

  • The TA400 – the biggest articulated hauler made by Terex Trucks

This robust machine excels at delivering cost-effective production at large-scale construction projects, quarries and mines.
Read full article >>

TII Group

TII Group - transport of wind turbine

TII Group (Scheuerle, Kamag, Nicolas, Tiiger) is presenting new heavy-duty and special transport vehicles and solutions. These include wind turbine transport innovations for turbine blades with over 80 metre lengths, Tiiger SD modular heavy-duty transporter, EuroCompact U5 low-bed trailer and SPMT/SPMT Light self-propelled vehicles.

  • The new transport solutions

The TII Group is presenting itself at this year's bauma in Munich as dynamic, international and having close proximity to its customers.
Read full article >>

Tobroco-Giant

First electric GIANT wheel loader - G2200E X-TRA

Tobroco-Giant will display 13 new products such as the G2200E X-TRA (lower front) and G2200E electric wheel loaders, G1500/G2200/G3500 X-TRA articulated loaders, GT5048 telehandler concept, SK201D/SK252D skid steer loaders, D254SW TELE telescopic loader, V452T X-TRA HD and G4500 X-TRA wheel loaders or a full range of 100 attachments.

  • The machines, technology and with an extensive dealer network

Customers worldwide have the demand for ecological and reliable machines that can carry out a wide variety of activities all year round.
Read full article >>

  • The first fully electric loaders - the G2200E and G2200E X-TRA

The G2200E models combine the best of both worlds with the advantages of an articulated loader and near-silent operation and zero emissions.
Read full article >>

  • The new TOBROCO-GIANT G1500 X-TRA loader

The new compact loader from TOBROCO-GIANT offers performance, outstanding versatility and reduced running costs and fuel consumption.
Read full article >>

  • The new G3500 X-TRA compact loader

Developed as a reliable and compact powerhouse the G3500 X-TRA is ready to make its debut at Bauma.
Read full article >>

  • 100 different from TOBROCO-GIANT

TOBROCO-GIANT offers more than 100 different attachments so GIANT machines can be used all year long.
Read full article >>

Topcon

Topcon Positioning Group will be unveiling several new technologies at Bauma 2019. Photo: Topcon Positioning Group

Topcon presents solutions for the automation of construction processes via digital technologies. Visitors can find out about the Pavelink (all-round software for logistics, planning and scheduling), new machine controls for excavators, earthmoving trucks and drilling rigs or recent developments of the site management software, Sitelink3D.

  • New digital technologies to enhanced construction project workflow

Topcon Positioning Group will be demonstrating how integrated software and hardware systems can help to significantly increase productivity and efficiencies
Read full article >>

Tradecc

Tradecc - Rubber ACRYL

Tradecc will showcase innovations in construction chemicals for waterproofing, water sealing, tunneling, structural repair and reinforcement and coatings such as the PC® ELASTOSWELL hydrophilic swell strip for waterproofing, PC® 509 Rubber ACRYL five-component acrylate injection liquid and PC® CARBOCOMP Laminates bending carbon fibre.

  • PC® ELASTOSWELL, PC® 509 Rubber ACRYL, PC® CARBOCOMP Laminates

Tradecc will be showcasing its most recent innovations in construction chemicals for waterproofing, water sealing, tunneling, structural repair and reinforcement and coatings at Bauma
Read full article >>

Transfluid

TRANSFLUID - TOWERCLUTCH

Transfluid presents the TowerClutch self-standing power transmission for high power rating hydraulic pumps equipped with the MPCB-R5 electric controller. The TowerClutch is suitable for rock crushers, wood chippers, drill rigs, waste grinders, rock mills and reclaimers as well as for marine applications such as dredges and work boats.

  • The new TOWERCLUTCH

A Power transmission designed to satisfy the growing market demand for disconnectable PTOs with pump drives for high power rating hydraulic pumps.
Read full article >>

Umdasch Group Ventures

Contour Crafting 3D Printer

Umdasch Group Ventures presents 3 solutions for construction processes. The Contakt is a digital construction site intelligence for an increase of productivity, the Neulandt 3P is a mobile field factory for the production of precast concrete building segments and the Contour Crafting is a 3D construction printing with (in-situ) concrete.

  • The potentially disruptive solutions for construction processes

They deal exclusively with pressing issues of the future and develop potentially disruptive solutions based on the latest technologies in order to revolutionize construction processes.
Read full article >>

Vermeer

Vermeer RTX1250i2 Ride-On Tractor

Vermeer is going to launch more than 20 products suitable for a wide range of applications. New portfolio includes the RTX1250i2 ride-on tractor with intelligent features, D40x55DR S3 Navigator/D8x12 Navigator horizontal directional drills, SPX25 vibratory plow, S925TX mini skid steer and SC382 stump cutter as well as many others.

  • The Full Range of Innovative Machinery

From utility and pipeline installation to tree care as well as recycling and forestry, Vermeer will have more than 20 machines on display at bauma 2019 in Munich, Germany.
Read full article >>

  • The D40x55DR S3 Navigator Horizontal Directional Drill

The new Vermeer D40x55DR S3 Navigator® horizontal directional drill delivers excellent productivity in broad range ground conditions, from hard, medium and soft rock to loamy/dirt and clay.
Read full article >>

  • The D8x12 Navigator Horizontal Directional Drill

Vermeer expands its line of utility installation equipment with the launch of the D8x12 Navigator® horizontal directional drill.
Read full article >>

  • The new Vermeer RTX1250i2 Ride-On Tractor

The new Vermeer® RTX1250i2 ride-on tractor boasts intelligent controls and interchangeable attachments to help maximize productivity for utility installation work.
Read full article >>

  • The new S925TX Mini Skid Steer

Vermeer has expanded its compact equipment lineup with the new S925TX mini skid steer, designed to provide impressive lifting performance and…
Read full article >>

  • The Vermeer SPX25 Vibratory Plow

The new Vermeer SPX25 vibratory plow is designed for fast and efficient cable/fiber and irrigation system installation.
Read full article >>

VÖGELE

The new VÖGELE's flagship -  the SUPER 3000-3(i)

Vögele is showcasing new product range of road pavers featuring its flagship, the SUPER 3000-3 (i) Premium Line high-performance large paver, SUPER 1000 (i)/1003 (i) compact pavers, SUPER 1600/1603 universal class pavers, SB 300/SB 350 fixed-width screeds and new functions of the software-based process-management solution, WITOS Paving.

  • The SUPER 3000-3(i), the SUPER 1000(i) and 1003(i) compact pavers, the SB 300 and SB 350 Fixed-Width Screeds, and the new functions of the WITOS Paving process

A high-performance large paver for layer thicknesses up to 50cm, fixed-width screeds with particularly user-friendly features, and new solutions for the networked job site
Read full article >>

Volvo CE

Volvo EC200E

Volvo Construction Equipment launches the 20-ton EC200E crawler excavator for medium-duty applications featuring the Stage V engine, ECR88D short swing radius mini excavator, P2820D ABG tracked compact paver, P2870D ABG wheeled compact paver and updated G-Series articulated haulers with intelligent technologies such as the OptiShift.

  • The new EC200E, 20-ton crawler excavator

Aimed squarely at one of the most competitive segments of the excavator market, Volvo Construction Equipment’s (Volvo CE) new EC200E crawler excavator is the perfect partner for a wide range of medium-duty applications.
Read full article >>

  • The upgraded Volvo ECR88D short swing radius excavator

With powerful, fuel-efficient Volvo engine, a perfectly matched hydraulic system and a robust body,…
Read full article >>

  • Volvo articulated hauler G-Series

Volvo Construction Equipment has updated its G-Series articulated hauler range.
Read full article >>

  • Volvo Insight Reports

The latest addition to Volvo Construction Equipment’s Insight Reports promises customers the understanding to better manage their fleet, and boost site efficiency.
Read full article >>

  • The P2820D ABG and P2870D ABG - the compact pavers

The perfect partners for small-to-medium paving applications, they offer low operating cost, safety and operator comfort.
Read full article >>

  • Stage V compliant engines

Engine and construction equipment manufacturers are facing their toughest emissions challenge yet with the release of new EU Stage V emissions legislation coming into force this month.
Read full article >>

Volvo Trucks

Volvo Trucks construction line-up bauma 2019

Volvo will showcase construction trucks line-up designed for high productivity and performance. Volvo FMX and FH trucks are suitable for challenging environment. The FH16, equipped with 750 hp engine, is optimal for heavy loads. The company will also introduce smart truck technologies and innovations such as the I-Shift transmission.  

  • Innovations for Volvo Trucks’ construction line-up

Volvo Trucks will participate at the world leading construction machinery trade fair Bauma in Munich April 8-14, highlighting purposeful innovations for Volvo Trucks’ construction line-up, where each new feature…
Read full article >>

Wacker Neuson

Wacker Neuson and Kramer at Bauma

The company is presenting the zero-emission portfolio featuring new products such as battery-powered AS60e rammer and AP2560e vibratory plate, EZ17e zero tail mini excavator and DW15e electric wheel dumper. Moreover, Wacker Neuson offers new digitalization solutions, realistic driving simulator and dual view concept for wheel dumpers.

  • The zero emission range

At Bauma 2019, international construction equipment manufacturer Wacker Neuson Group will be taking visitors on an electrifying tour of its vast product portfolio.
Read full article >>

Wirtgen

WIRTGEN GROUP - Smart Synergies and Innovations at Bauma

Wirtgen will present new solutions for cold milling, cold recycling, soil stabilization, concrete paving and surface mining. The company’s innovations are the W 380 CRi cold recycler, SP 124 slipform paver, two brand new F-series cold milling machines, 220 SMi and 220 SM 3.8 surface miners. Moreover, other 22 models will be shown.

  • The innovative road construction machinery

The Wirtgen Group is the global trendsetter when it comes to innovative road construction machinery – a fact highlighted by the company’s approx. 120 exhibits and 13,000 m² of exhibition space at Bauma 2019.
Read full article >>

WOLFFKRAN

WOLFFKRAN - The WOLFF 1250 B

WOLFFKRAN presents itself under the motto WOLFFKRAN MORE. Therefore, new products such as the WOLFF 133 B hydraulic luffing jib crane, Big WOLFF 1250 B luffing jib crane (80 m jib radius, 60 t lifting capacity) and WOLFF 6020 clear crane will be introduced as well as a service van, Crane Configurator and the “Lifting Lounge” online portal.  

  • The new WOLFF luffing crane 133 B, the BIG WOLFF 1250 B and the latest WOLFF 6020 clear crane

WOLFFKRAN will present itself under the motto WOLFFKRAN MORE at bauma 2019. MORE – Manufacturer, Operations, Rental, Expertise
Read full article >>

  • The new WOLFF 133 B - part of WOLFF luffing crane range

WOLFF 133 B is to continue the success story of its predecessor in the 125 tm class.
Read full article >>

  • The Big WOLFF 1250 B - the largest WOLFF crane ever

A big WOLFF on a big stage: WOLFFKRAN is presenting its largest crane, the WOLFF 1250 B, to a wide audience for the first time at the bauma 2019.
Read full article >>

  • The WOLFF 6020 clear – flat-top WOLFF crane

Major improvements of its successor, the WOLFF 6020 clear, include an increased tip load capacity and the integration of numerous design details of the latest WOLFF clear models.
Read full article >>

Yanmar

Yanmar 4TN88G gas engine

Yanmar will demonstrate a new range of Stage V engines; two industrial gas-powered (LPG) engines - 4TN88G (45 kW) and 4TN98G (63 kW), two diesel-powered engines 4TN101 (105 kW) and 4TN107 (155 kW) with DOC/DPF/SCR aftertreatment, three small industrial L-V series engines L48V, L70V and L100V as well as the TNM/TNV common rail engines.

  • New Industrial Gas Engines

Yanmar has developed gas-powered industrial engines that utilize LPG (liquid petroleum gas) and meet both U.S. EPA※1 Tier2, CARB※2 Tier4 and EU Stage V emissions regulations.
Read full article >>

  • The comprehensive Diesel and Gas Engine Line-up

Yanmar will exhibit its all-new gas-powered and diesel-powered industrial engines at the world’s largest exhibition for construction equipment, BAUMA 2019.
Read full article >>

  • Certification for EU Stage V Emission Standards

The EU Stage V standards to be introduced in Europe are one level stricter than existing standards, and will be implemented over 2019 and 2020 towards limiting…
Read full article >>

Zoomlion

Advertisement

Zoomlion is going to introduce four new forklifts, one is powered by diesel and the three remaining are electrically driven. All of them are offered with optimal package. Moreover, the company showcases the T7020 12H (CE) flat top tower crane (70 m reach) and two mobile cranes; ATC 1000 (100 tons capacity) and ATC 960 (60 tons capacity).

  • 3 product lines, a new distribution logistics centre for Europe and new business services for lifting and logistics operators

At Bauma 2019, Zoomlion CIFA Europe will offer a complete range of lifting solutions including forklifts, stationary and mobile cranes.
Read full article >>
 

See the bauma channel >>

Komatsu is at the forefront of innovative digital and environmental technologies and visitors at bauma will be treated to Komatsu World Premieres, which will be revealed at the fair.

Read full article >>

 

Source: LECTURA GmbH Verlag

Sponsors